Description: The Allen-Bradley 1336-SN-SP6A PCB or Printed Circuit Board has an output rating of 460 volts AC and 60 to 100 horsepower.

The board is compatible with Allen-Bradley D-Frame 1336 Plus, Plus II, Impact, and Force drives.

About the 1336-SN-SP6A

The Allen-Bradley 1336-SN-SP6A Inverter Buffer Board Assembly Kit is a replacement buffer board for 1336 series Allen-Bradley AC drives.

The 1336-SN-SP6A buffer board is a stand-alone device that does not share a common bus and is compatible with Impact, Force, Plus, and Plus series 1336 drives.

In general, the 1336-SN-SP6A PCB Inverter Buffer Board and all similar boards help to limit switching voltages and any rise in transient voltage levels in the circuit.

The 1336-SN-SP6A buffer board assembly kit includes 3 inverter www.ge-drive.com buffer boards and 15 included fastening screws.

Designed to be compatible with Allen-Bradley 1336 Plus, Plus II, Force, and Impact drives.

The AC input voltage is rated at 230 volts and the output power is rated at 40 to 50 horsepower.

It is also compatible with 460-volt AC D-frame drives rated at 60 to 100 horsepower.

The 1336-SN-SP6A board is available as a 575-volt AC power-rated D-Frame 1336 Plus rated between 75 and 100 horsepower,

Plus II, Force, and Impact series drives.

The 1336-SN-SP6A inverter buffer plate is not backward compatible with any previous inverter buffer plate version.

It can only be used as a replacement for a buffer plate with similar specifications. Replacing the old buffer plate and installing a new one is very simple.

To install the 1336-SN-SP6A PCB inverter buffer board, remove the case (if any) and switch off the power to the hard disc.

Remove the screws securing the old board, remove the old board, and replace it with the new board.