About the 1440-DYN02-01RJ

The Allen-Bradley 1440-DYN02-01RJ module is a dynamic measurement module.

It is an electronic machine condition monitoring and protection device specifically designed and manufactured to measure vibration, pressure and strain on dynamic inputs.

Some of the inputs that can be connected to the 1440-DYN02-01RJ Dynamic www.ge-drive.com Measurement Module include any Allen-Bradley non-contact eddy current probe input,

standard integrated electronic piezoelectric (IEPE) accelerometer inputs, speed sensor inputs, and DC voltage measurement inputs.

A tachometer input is used to provide speed measurement and order analysis functions. Eddy current probes, unpowered magnetic probes, and other powered and unpowered tachometer sensors are also available for this module.

The Allen-Bradley 1440-DYN02-01RJ Dynamic Measurement Module is primarily used as a machine safety condition monitoring element.

By providing the information needed to protect machines from catastrophic failures, critical vibration parameters can be addressed using existing automation and control systems such as PLCs and displays.

An important thing to note about the Allen-Bradley 1440-DYN02-01RJ Dynamic Measurement Module is that

It must be installed on its network with a dedicated 1440-ACNR ControlNet adapter module and up to ten 1440-DY12-01RJ modules.

No other XM-Series module can be connected to a Dynamic Measurement Module on the same network.

Dynamic Measurement Modules should always be installed in a protected enclosure to keep them away from high temperatures, high humidity and dusty environments.

Wiring to and from the module shall be 12…28 or 14…22 AWG copper conductors without pre-treatment, and 8 AWG rated conductors are required for DIN rail grounding for electromagnetic interference (EMI) protection purposes.