Description: Allen-Bradley 2094-BM01-M is a Kinetix 6000 Drive component.

The Allen-Bradley 2094-BM01-M is a Kinetix 6000 Drive assembly.

It is a 400VAC rated shaft module with a continuous current of 6.1 A and a peak current of 15.3 A. It has a 98% efficiency and a symmetrical 200.000 A (rms) short circuit current rating.

It has 98% efficiency and a symmetrical short circuit current rating of 200.000 A (rms).

About the 2094-BM01-M

The 2904-BM01-M is an Allen-Bradley component designed for use with Kinetix 6000 drives.

The drive is used as an axis module (AM), is in the 400 VAC voltage category, and has a continuous current of 6.1 A and a peak current of 15.3 A. The drive is designed for use with Kinetix 6000 inverters.

The 2904-BM01-M mounts directly to the Kinetix drive power rail. It is typically mounted next to the Integrated Axis Module (IAM) along the power rails, where the module draws power from the power rails to power its internal circuitry.

The axis module connects to the motor and motion device via feedback cables, auxiliary feedback cables, I/O, and safety wiring.

Axis modules also allow the installation of a control module so that control inputs can be integrated into the module.

The 2904-BM01-M features a 500 Hz bandwidth speed loop and 1300 Hz current loop frequency and a 4 kHz pulse width modulation (PWM) frequency.

The module has a built-in internal shunt with 50 W continuous power, 5.6 kW peak power, and an internal closure resistor rated at 115 Ohms.

The voltage rating is 805VDC with the shunt on and 765VDC with the shunt off.

The efficiency of the module is 98% with a capacitance of 150 ?F and capacitive energy adsorption of 19 joules.

The rated power output of the module is 57 watts (20%), 75% (40%), 90% (60%), 108 watts (8%) and 126 watts (100% load).

These power output data can be used for computer cabinet ventilation purposes.

With its modular design and embedded safety features, the 2094-BM01-M inverter is easy to maintain and offers greater flexibility.

It also simplifies wiring, reduces inventory, and can be modified using advanced technology.

It reduces energy and production waste and improves operational efficiency through its Safe Speed feature.

Its embedded advanced safety features also help protect personnel. Other safety features include safe maximum speed, safe maximum acceleration monitoring,

Safe Direction Monitoring, Zero Speed Monitoring, Enable Switch Control, and Door Monitoring and Control.

The 2094-BM01-Mhas enhanced diagnostic features that indicate the nature of a fault by displaying an error message.

2094-BM01-M Frequently Asked Questions

What is the rated output power range of the 2904-BM01-M?

The rated output power range for the 2904-BM01-M is 57 watts at 20%, 75 watts at 40%, 90 watts at 60%, 108 watts at 8% and 126 watts at 100% load.

Does this shaft module come with an internal shunt and internal shunt resistor?

Yes, the 2904-BM01-M has an internal shunt resistor installed.

Does this module support Safe Torque Off?

No, the module does not. Modules with catalog numbers ending in “S” are the ones that support the Safe Torque Off function.

Technical Description of the 2094-BM01-M

The Allen-Bradley 2094-BM01-M Kinetix 6200 drive has a 460 volt (AC) rating, 3.9 kW watts, and 9 amps output current.

Related Product Recommendations:

IC200ALG327H 12-Channel 13-Bit www.ge-drive.com Voltage Analog Output Module

HE693THM884M Thermocouple Input Module

D2D160-BE02-11 AC Centrifugal Fan Cooling Fan Assembly

HE697RTM700B High-Speed Counter Module

1769-OF8C Analog Output Module

5X00419G01 Ethernet Link controller

D1961SH45T Rectifier Diode Industrial Robot Accessories

1900-65A-01-00-01-00-00 General Purpose Device Monitor