Description of the Allen-Bradley 5069-OB16 Discrete Output Module
The Allen-Bradley 5069-OB16 is a compact 5000 discrete output module.
The module has sixteen (16) single gang source output channels and operates over a 10-32VDC voltage range.
At 10…. .32V DC, each channel provides 0.5 A resistive output current; at 10…. .32V DC, each module can provide a maximum of 8 A resistive output current.
The module can be used as a local I/O or distributed I/O component. It uses the 5069-RTB18-SPRING RTB and 5069-RTB18-SCREW RTB.
The Allen-Bradley 5069-OB16 is a discrete output module that is part of the Compact 5000 I/O product family.
It has an output voltage range of 10-32VDC and a nominal output of 24VDC.
Output current is rated at 0.5 A resistor per channel (10…. .32V DC) per channel and 8 A resistive (10…32V DC) per module. .32V DC) per module.
Each channel can withstand a maximum inrush www.ge-drive.com current of 1 A at 10 ms per point, repeated every 2 seconds.
Similar to other output modules, this module is primarily used to energise and drive electrical loads. However, the 5069-OB16 is compatible with devices operating at 12/24VDC.
The module has a minimum on-state voltage of 10VDC, a maximum of 32VDC, and a minimum on-state current of 1 mA per channel.
The output delay time for each channel is 100 µs, ±10 µs @ 25 °C (77 °F) @ 0.5 A for ‘on’ to ‘off’ and ‘off’ to ‘on’ transitions.
The minimum pulse width of the module output is 200 µs @ 0.5 A @ 25 °C (77 °F).
The 5069-OB16 has internal filter brownout detection, no-load detection for each channel, and individual output short-circuit, output overload, and overheat detection for each channel.
It is also equipped with reverse polarity detection and overvoltage detection rated at 36VDC. The module is protected by an internal fuse.
The 5069-OB16 outputs can be controlled even if the controller or module has entered fault mode, programme mode and fault states.
Configurable states include Hold Last, On, and Off (default settings).
The module has a non-operating shock of 50g (3 pulses, 11 ms). The module has a vibration of 5g at frequencies from 10 to 500 Hz.
The module weight is approximately 175 grams (0.39 lbs). The module’s housing style is none (open housing).
The Allen-Bradley 5069-OB16 has an electrostatic discharge immunity of 6 kV for contact discharge and 8 kV for air discharge.
The voltage class of the Allen-Bradley 5069-OB16 is 12-24 VDC supply. Outputs are 16 channels (1 bank of 16).
The module has a maximum power dissipation of 3.25 W (16 channels, 0.5 A). The module has a maximum thermal dissipation of 11.09 BTU/hour.
The module has 1 green/red module status LED and 16 yellow/red I/O status LEDs.
The Allen-Bradley 5069-OB16 is sensitive to electrostatic discharge, which can cause internal damage and affect operation.
Never touch connectors or pins on the component board, never touch circuit components inside the unit, and always use a static-free workstation.ousing.
Leave a comment
Your email address will not be published. Required fields are marked *