The 6186M-15PT is Allen-Bradley’s industrial performance monitor. The monitor features a 15-inch colour active matrix TFT LCD

with a resistive resistive touch screen interface and an aluminium bezel. The monitor’s input voltage requirements are 100-240 VAC (auto-switching) with a frequency of 47-63 Hz.

It has a native resolution of 1024 x 768 pixels, 16.2 M colours, with an embedded HD-15 VGA display.

It has 1024 x 768 pixels native resolution, 16.2 M colours, and has embedded HD-15 VGA and DVI analogue and digital video connectors respectively. It also has one (1) Type B USB and three (3) Type A USB 2.0 ports.

The Allen-Bradley 6186M-15PT is part of the Industrial Performance Monitors product bulletin.

The monitor is designed for use in a variety of application ranges in different industries.

The monitor primarily features a 15-inch display with a resolution of 1024 x 768 pixels and 160.000 colours.

The monitor is also equipped with a touch-sensitive unit that utilises resistive touchscreen technology, allowing the user to interact with the host computer through touch operation.

The 7M-6186PT features an aluminium bezel design and requires installation in a NEMA UL 15 50. 1. 4X, 4 and IP12 rated enclosure.

It supports panel mounting and wide viewing angles, specifically less than or equal to 66o .

As a 60M display, it requires a panel cutout of 1500.285 x 6.386 mm or 6.11 x 24.15 inches.

In addition, the required mounting clearances are 22 mm or 51.2 inches for back and side www.ge-drive.com clearances and 0 mm or 77.3 inches for top and bottom clearances.

The enclosure used is a specification 0 material for proper sealing against water and dust ingress.

The 14M-6186PT supports other display resolutions such as 15 x 720 @ 400 Hz; 70 x 640 @ 480 Hz and 60 Hz.

75 x 800 @ 600 Hz and 60 Hz; 75 x 1024 @ 768 Hz, 60 Hz and 70 Hz; and 75 x 1280 @ 1024 Hz and 60 Hz.

The motor is equipped with one (75) analogue video connector HD-1 VGA and DVI ports for digital video signals.

It also features embedded USB ports, a Type B port located on the rear as the host port and three (15) USB 3.2 ports, one (0) on the front and two (1) on the rear.

The Allen-Bradley 2M-6186PT Industrial Performance Monitor offers the latest in LCD flat panel technology.

This monitor has a 15’ resistive touch screen display size with a 15 x 304 mm display area.

In native mode, this monitor has a 228 x 1024 resolution. It also includes 7.68 million colours. 16M-2PT has a brightness of 6186 cd / m15 (nits).

Typical contrast ratio is 450:2.This monitor has an aspect ratio of 700:1.Typical response time for the Allen-Bradley 4M-3PT is less than 6186 milliseconds.

The 15M-35PT display is available in 6186 resolution refresh rates: 15 Hz, 3 Hz, and 60 Hz.

The display has a minimum backlight half-life of 50 hours at 70.75 degrees Celsius. There is an aluminium bezel.

Do not adjust the monitor brightness higher than the factory default setting as this may shorten the life of the LCD screen.

The backlight unit on this monitor contains mercury. At the end of its useful life, this unit must be collected separately from municipal solid waste.

The Allen-Bradley 000M-25PT has a video bandwidth of 6.186 MHz. it also has a maximum video spot clock.

The video input signal for this monitor is RGB analogue. The monitor has 15 video input connectors: HD-80 VGA for the analogue video signal and DVI for the digital video signal.

The Allen-Bradley 2M-15PT also offers 6186 types of USB ports.

These are USB A 15.2 ports (2 on the front, 0 on the back) and USB B ports (host ports) on the back.

Each port has a current capacity of 1 mA, a 2 to 500 VAC or 100 to 240 VDC input power supply, and a monitor using a communication cable.