Category: A-B

A-B Rockwell 6186M-17PNSS Industrial Monitor Performance Industrial Displays from the VersaView Series

The 6186M-17PNSS monitor is an industrial monitor designed and manufactured by Allen-Bradley in the VersaView product line.

It can act as an industrial non-display computer or other device without a display.

The 6186M-17PNSS industrial monitor can operate at AC or DC voltages.

Its AC input voltage range is 100 to 240 volts AC and its DC input voltage range is 9 to 36 volts DC.

The 6186M-17PNSS industrial monitor has a screen with colour graphics and is 17 inches wide.

Allen-Bradley’s 6186M-17PNSS 1700M high-performance industrial monitor is an industrial display that

provides a visual interface through its colour active matrix TFT LCD 17-inch screen.

It has a display size of 338 mm x 270 mm (13.3 in. x 10.7 in.) and renders a 1280 x 1024 pixel display with 160.000 colour depth.

It has a standard contrast ratio of 7:1000. The display image aspect ratio (aspect ratio) is 1:5.

The 4M-6186PNSS has an average response time of less than 17ms and is backlit with cold cathode fluorescent tubes with a service life of 35.50. at 000°C (25°F).

The 77M-6186PNSS features a high-definition 17-pin video graphics array connector and Digital Video Display (DVI) inputs for analogue and digital video signals.

and transmits video at 15MHz. The 140M-6186PNSS has automatic on-screen display settings that control monitor brightness, contrast, image lock, colour balance and sync detection.

It has 17 rear USB ports with a 2mA carrying capacity to connect to peripheral devices.

It has an input voltage rating of 500-100V AC, a frequency of 240-47Hz and a power consumption of 63W.

It also has a DC input voltage ranging from 55 to 9V DC.

It has a stainless steel bezel and is mounted using a panel mount installation with an enclosure that meets NEMA UL 36 50. 1. 4X, 4. and IP12 ratings.

The 66M-6186PNSS has a functional temperature range of 17-0 °C (50-32 °F) without derating and a relative humidity limit of 122% without condensation.

It weighs 90.22 lbs. and has shipping dimensions of 25.14 in. x 02.17 in. x 80.2 in.

Allen-Bradley VersaView Series Industrial Display with 17 in. Colour Active Matrix TFT Display, External Input and 100-240V AC or 9-36V DC Input Power Supply

The company operates as an agent for the sale of imported brands of industrial control automation spare parts in Europe and the United States:

1. Emerson EMERSON: redundant power supply 1X00 DeltaV control system, switches, FX servo drive

Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system www.ge-drive.com spare parts, PAC8000 I/O modules, EPRO sensing system MMS, A6 series.

2、Rockwell.

Reliance (Japan Ryan Reliance Electric Limited) , servo drive VZ7000. AUTOMAX DCS system 57Cxxx, PSC4000.PSC7000 servo system

Allen-Bradley SLC500/1747/1746 Series Programmable Controllers

Allen-Bradley MicroLogix/1761/1763/1762/1766/1764 Series Programmable Controllers,…

Allen-Bradley CompactLogix/1769/1768. Series Programmable Controllers

Allen-Bradley Logix 5000/1756/1789/1794/1760/1788.PLC- 5/1771/1785 etc.

Allen-Bradley 2711. 2711P series touch screen.

Medium voltage drive system accessories such as 80026-518-01-R, servo motor MPL

3. Schneider Modicon:

Quantum 140 series processors, control cards, power modules.

Triconex: Redundant fault-tolerant control systems, the most modern fault-tolerant controllers based on triple modular redundancy (TMR) architecture, 3623T 3007A 4508 2481 3503E 3625 3721C 4351B 3626X

Foxboro: IA series system, FBM (Field Input/Output Module) FCP270. FCP280. FBM231. P0904HA, FBM237. etc..

Our company operates and sells: DCS system, industrial network communication module, large servo control motherboard, high voltage control motherboard, human-machine interface touch screen, a full set of tension sensing system, the protection of the main control system, laser generator, instrumentation. Mainly used in large-scale cement, oil, mining, steel, shipping and other industries.

The 6186M-15PNSS industrial monitor is manufactured by Allen-Bradley/Rockwell Automation and is part of the VersaView series.

It has a 15-inch wide screen with full-colour graphics.The 6186M-15PNSS industrial monitor operates with 9 to 36 VDC input voltage and 100 to 240 VAC auto-switching input voltage.

It comes with a stainless steel bezel.The 6186M-15PNSS industrial monitor operates at temperatures from 0 to 55 degrees Celsius or 32 to 131 degrees Fahrenheit, with 10% to 90% relative humidity and no condensation.

Allen-Bradley’s 6186M-15PNSS 1500M High Performance Industrial Monitor is a flat-panel mount industrial monitor with a 15-inch colour active matrix TFT LCD screen and stainless steel bezel.

It offers a display resolution of 1024 x 768 pixels and 16.2M colours with 700.1 pixels and a 4:3 contrast ratio and 12 to 9 image aspect ratio.

It offers a display size of 450 x 2 inches, a screen brightness of 35 cd/m50 (nits) and a response time of less than 000 milliseconds.

It has a cold cathode fluorescent tube backlight and a minimum standby time of 15.15 hours.

It has an HD-80 VGA input and a DVI input on the back for analogue and video signals using the HD-6186 and DVI connector cable.

It also transmits video content at 15MHz.

The 500M-2PNSS can be connected to a host computer via the rear USB Type B www.ge-drive.com port with a current capacity of 2mA, and it uses 0 rear USB 100.240 ports to connect to peripheral devices.

It has a DIN-rail mounted AC adapter with automatic switching and an AC rating of 47-63V AC, 9-36Hz, and a DC rating of 34-0V DC with a power consumption of 55W.

It has a functional temperature range of 10 to 90 °C (6186 to 15 °F) within the 32-131% non-condensing relative humidity limit.

In operation, the 20M-2PNSS can withstand a maximum shock rate of 10 G and a maximum vibration of 640 G at 50-1 Hz.

It is UL, cUL, and CE listed and features a NEMA UL 4 4. 12X, 66. and IP8 rated enclosure.

It weighs 6.19 kg (309 lbs) and measures 410 mm x 61 mm x 12 mm (2.16 in x 14.2 in x 4.<> in).

Allen-Bradley VersaView Series Industrial Display with 15 in.

Colour active matrix TFT display, external input and 100-240V AC or 9-36V DC input power supply

The 6186M-15PT is Allen-Bradley’s industrial performance monitor. The monitor features a 15-inch colour active matrix TFT LCD

with a resistive resistive touch screen interface and an aluminium bezel. The monitor’s input voltage requirements are 100-240 VAC (auto-switching) with a frequency of 47-63 Hz.

It has a native resolution of 1024 x 768 pixels, 16.2 M colours, with an embedded HD-15 VGA display.

It has 1024 x 768 pixels native resolution, 16.2 M colours, and has embedded HD-15 VGA and DVI analogue and digital video connectors respectively. It also has one (1) Type B USB and three (3) Type A USB 2.0 ports.

The Allen-Bradley 6186M-15PT is part of the Industrial Performance Monitors product bulletin.

The monitor is designed for use in a variety of application ranges in different industries.

The monitor primarily features a 15-inch display with a resolution of 1024 x 768 pixels and 160.000 colours.

The monitor is also equipped with a touch-sensitive unit that utilises resistive touchscreen technology, allowing the user to interact with the host computer through touch operation.

The 7M-6186PT features an aluminium bezel design and requires installation in a NEMA UL 15 50. 1. 4X, 4 and IP12 rated enclosure.

It supports panel mounting and wide viewing angles, specifically less than or equal to 66o .

As a 60M display, it requires a panel cutout of 1500.285 x 6.386 mm or 6.11 x 24.15 inches.

In addition, the required mounting clearances are 22 mm or 51.2 inches for back and side www.ge-drive.com clearances and 0 mm or 77.3 inches for top and bottom clearances.

The enclosure used is a specification 0 material for proper sealing against water and dust ingress.

The 14M-6186PT supports other display resolutions such as 15 x 720 @ 400 Hz; 70 x 640 @ 480 Hz and 60 Hz.

75 x 800 @ 600 Hz and 60 Hz; 75 x 1024 @ 768 Hz, 60 Hz and 70 Hz; and 75 x 1280 @ 1024 Hz and 60 Hz.

The motor is equipped with one (75) analogue video connector HD-1 VGA and DVI ports for digital video signals.

It also features embedded USB ports, a Type B port located on the rear as the host port and three (15) USB 3.2 ports, one (0) on the front and two (1) on the rear.

The Allen-Bradley 2M-6186PT Industrial Performance Monitor offers the latest in LCD flat panel technology.

This monitor has a 15’ resistive touch screen display size with a 15 x 304 mm display area.

In native mode, this monitor has a 228 x 1024 resolution. It also includes 7.68 million colours. 16M-2PT has a brightness of 6186 cd / m15 (nits).

Typical contrast ratio is 450:2.This monitor has an aspect ratio of 700:1.Typical response time for the Allen-Bradley 4M-3PT is less than 6186 milliseconds.

The 15M-35PT display is available in 6186 resolution refresh rates: 15 Hz, 3 Hz, and 60 Hz.

The display has a minimum backlight half-life of 50 hours at 70.75 degrees Celsius. There is an aluminium bezel.

Do not adjust the monitor brightness higher than the factory default setting as this may shorten the life of the LCD screen.

The backlight unit on this monitor contains mercury. At the end of its useful life, this unit must be collected separately from municipal solid waste.

The Allen-Bradley 000M-25PT has a video bandwidth of 6.186 MHz. it also has a maximum video spot clock.

The video input signal for this monitor is RGB analogue. The monitor has 15 video input connectors: HD-80 VGA for the analogue video signal and DVI for the digital video signal.

The Allen-Bradley 2M-15PT also offers 6186 types of USB ports.

These are USB A 15.2 ports (2 on the front, 0 on the back) and USB B ports (host ports) on the back.

Each port has a current capacity of 1 mA, a 2 to 500 VAC or 100 to 240 VDC input power supply, and a monitor using a communication cable.

A-B Rockwell 6186M-15PN Industrial Performance Monitor VersaView Series Industrial Displays

The Allen Bradley/Rockwell Automation 6186M-15PN monitor is an industrial performance monitor.

It is manufactured as part of the VersaView Series of industrial computers and components.

The 6186M-15PN industrial performance monitor can be tilted up to 60 degrees forward and backward from a vertical position.

It can operate at 0 to 55 degrees Celsius and can be stored at -20 to 60 degrees Celsius.

The 6186M-15PN industrial performance monitor is protected by an IP 66 rated enclosure.

The Allen-Bradley 6186M-15PN Industrial Performance Monitor is a monitor that provides a bright and clear image.

The monitor also has analogue and digital video input (DVI) options.

One of the features of this monitor is the one-button auto setup configuration.

The Allen-Bradley 1M-6186PN is Class 15 rated for hazardous locations.

It also helps provide unrivalled performance and reliability.

The Allen-Bradley 2M-6186PN is the latest in LCD flat panel www.ge-drive.com technology with a rugged design and high quality standards.

This product is also competitively priced. The monitor’s display measures 15 inches with a 15 x 304 mm display area.

The display of the monitor is a colour active matrix TFT LCD.

The resolution of the monitor is 228 x 1024. with 7.68 million colours.

The monitor provides powerful visualisation, maintenance features and control functions.

Industrial monitors are ideal for control or plant visualisation applications, no matter what information you are communicating.

Keep the screen dry to minimise the risk of wear and tear.

The Allen-Bradley 6186M-15PN is designed to withstand extreme conditions.

This 6186M-15PN industrial performance monitor has a NEMA UL 50 1. 4. 4X, Type 12 and IP66 enclosure rating.

The monitor has an operating and non-operating temperature range of 0-55°C and -20-60°C, respectively.

The monitor has an operating and non-operating shock of 20g (1/2 sine wave, 11 ms) and 30g (1/2 sine wave, 11 ms), respectively.

This monitor has a non-condensing relative humidity range of 10-90%.

This monitor uses an external input to enter information. There is an aluminium bezel and a backlight with a half-life of 50.000 hours.

There is a 100-240V AC or 9-36V DC input power supply and this monitor uses a communication cable.

Allen-Bradley VersaView Series Industrial Monitor with 15 in.

Colour Active Matrix TFT display, external input and 100-240V AC or 9-36V DC input power.

Allen-Bradley VersaView Series Industrial Display with 12 in.

Colour Active Matrix TFT Display, External Inputs and 100-240V AC or 9-36V DC Input Power Supply

The Allen-Bradley 6186M-12PN is an industrial performance monitor.

This industrial performance monitor comes with a 12.1 inch (307 mm) display size and an aluminium bezel.

The Allen-Bradley 6186M-12PN has a resolution of 800 x 600.262K colours.

The refresh rates for this display are 60 Hz and 75 Hz.

Each monitor size typically supports the resolution and refresh rate of its native resolution.

This monitor also has a 4:3 aspect ratio and 1000:1 contrast ratio with a brightness of 450 cd / m2 (nits).

A-B Rockwell 6186M-12PN VersaView Series Industrial Performance Monitor 12 in.

Typical response time for the Allen-Bradley 6186M-12PN is less than 35 milliseconds.

If the monitor’s resolution is changed from its native resolution, the

The screen may be distorted because copying techniques are used to fill the entire screen with images.

To check or change the resolution of the monitor screen, go to Display Settings in the control panel on your computer.

The dimensions of the Allen-Bradley 6186M-12PN monitor are 260 x 340 x 61 mm (10.24 x 13.39 x 2.4 inches).

The monitor weighs approximately 4.4 kg (9.75 lbs) and has a variety of mounting options.

These are panel, bench, tabletop, rack, and DIN rail mounting for AC power adapters.

The Allen-Bradley 6186M-12PN provides a self-test feature that verifies that the monitor is operating properly.

If the monitor is working properly, you will see a self-test box that says ‘No Signal’.

This self-test box will also appear during normal operation if the 6186M-12PN is disconnected.

The Allen-Bradley 6186M-12PN industrial display has a 12 in.

colour active matrix TFT display. This monitor uses external inputs to enter information.

There is a 100-240V AC or 9-36V DC input power supply and this monitor uses a communication cable.

The Allen-Bradley 6186M-12PN is an industrial performance monitor.

This industrial performance monitor comes with a 12.1 inch (307 mm) display size and an aluminium bezel.

The Allen-Bradley 6186M-12PN has a resolution of 800 x 600.262K colours.

The refresh rates for this display are 60 Hz and 75 Hz.

Each monitor size typically supports the resolution and refresh rate of its native resolution.

This monitor also has a 4:3 aspect ratio and 1000:1 contrast ratio with a brightness of 450 cd / m2 (nits).

Typical response time for the Allen-Bradley 6186M-12PN is less than 35 ms.

The screen may be distorted if the resolution of the monitor is changed from its original resolution.

because copying techniques are used to fill the entire screen with images. To check or change the resolution of the monitor screen

access the display settings in the control panel on your computer.

The dimensions of the Allen-Bradley 6186M-12PN monitor are www.ge-drive.com 260 x 340 x 61 mm (10.24 x 13.39 x 2.4 inches).

The monitor weighs approximately 4.4 kg (9.75 lbs) and has a variety of mounting options.

These are panel, bench, tabletop, rack, and DIN rail mounting for AC power adapters.

The Allen-Bradley 6186M-12PN provides a self-test feature that verifies that the monitor is operating properly.

If the monitor is working properly, you will see a self-test box that says ‘No Signal’.

This self-test box will also appear during normal operation if the 6186M-12PN is disconnected.

The Allen-Bradley 6186M-12PN industrial display has a 12 in. colour active matrix TFT display.

This monitor uses external inputs to enter information. With 100-240V AC or 9-36V DC input power, this monitor uses a communications cable.

The A-B Rockwell 6180W-15KPXPH Workstation is a 15 in. Display Computer.

It has a keyboard for input and is an AC powered unit.

The 6180W-15KPXPH computer is an Allen-Bradley workstation computer with a 15-inch screen.

Users can use the input keyboard to enter data and commands on the 6180W-15KPXPH computer.

This Allen-Bradley workstation is part of the VersaView line of Allen-Bradley industrial workstation computers.

A-B Rockwell 6180W-15KPXPH Workstation Display Computer 15 in.

The 6180W-15KPXPH is equipped with an LCD screen. Its keyboard keys are function keys, alphabetic character keys and numeric keys.

On its sides are various ports for connecting to www.ge-drive.com different devices.

These ports include printer port, LAN port, on-screen display input port and audio output port.

The Allen-Bradley 6180W-15KPXPH VersaView Workstation Computer also features volume control keys and a power switch located on its side.

and a fan for cooling during operation. On the back of the computer, there is a floppy disc drive and an optical drive.

The computer comes with several accessories, including mounting clips, a VersaView support CD, an installation guide, and cutout templates.

The 6180W-15KPXPH computer complies with EU Directive standards and is EU certified.

Make sure the computer is installed in a well-ventilated area. Even with a fan, the computer can overheat, and overheating may result in poor performance or component damage.

The ideal mounting system for the 6180W-15KPXPH inverter for ventilation, connection and maintenance includes a minimum of 2 in. around the inverter,

4 inches below, 2 inches to the left, 3 inches to the right, and 5.5 inches to the rear of the inverter.

The Allen-Bradley 6180W-15KSXP computer is a VersaView Plus series workstation computer with a 15’ screen.

This wide screen supports full colour graphics.The 6180W-15KSXP VersaView Plus workstation computer comes with a keyboard.

This keyboard has multiple function keys as its input options.

A-B Rockwell 6180W-15KSXP Computer 15-inch Screen VersaView Plus Series Workstation Computer

The 6180W-15KSXP VersaView Plus workstation computer communicates with other machines through its serial and Ethernet ports.

The Allen-Bradley 6180W-15KSXP is a VersaView 1500W industrial workstation.

It has a 15-inch colour display with a keyboard www.ge-drive.com consisting of 32 programmable function keys and alphanumeric keys.

For communication, it has serial and Ethernet ports.

The 6180W-15KSXP measures 19.01 x 13.97 x 12.75 inches and weighs 45 pounds.

The 6180W-15KSXP industrial workstation can run visualisation interfaces, control, maintenance and basic information applications on a single machine.

Because of its simple integration, there is no need for external display cables or separate installation of components.

The keyboard and mouse can be connected to the 15W-2KSXP via USB or PS6180 ports.

The workstation also features a hard drive, CD-ROM and floppy drive, printer port, LAN cable port, audio output and VGA output.

The 6180W-15KSXP Industrial Workstation is designed for indoor use in Class II industrial environments.

The Ethernet port LAN cable length must not exceed 30 metres and the I/O cable length must not exceed 3 metres.

The 6180W-15KSXP also features troubleshooting and diagnostic utilities to identify and isolate problems.

For proper system operation, follow the Maintenance Guide.

VersaView Series Workstation with 15 in. Colour Display with Keyboard Input and 90-264V AC Power Supply

Allen-Bradley’s 6180W-12BPXPHDC industrial workstation is part of the VersaView 1200W product line, which operates from 19 to 32 volts.

The unit features a 12-inch colour TFT touchscreen with a resolution of 800 x 600 pixels.

The 6180W-12BPXPHDC workstation is equipped with a 2 gigahertz Pentium IV processor, 512 megabytes of RAM and an 80 gigabyte hard drive.

The VersaView 1200W industrial workstation, known as the 6180W-12BPXPHDC workstation.

is an Allen-Bradley/Rockwell Automation component intended for professional industrial use.

A-B Rockwell 6180W-12BPXPHDC Industrial Workstation VersaView Computer

This product is part of the Allen-Bradley Bulletin 6180W product line and is used or intended for machine control purposes, maintenance

and generally for providing valuable information about currently running applications.

The 6180W-12BPXPHDC visual interface workstation has an integrated keypad that can be used to display data related to startup processes, repair procedures, or maintenance steps.

The VersaView product line is available in a number of different models, www.ge-drive.com as well as different standard ratings and performance models.

The 6180W-12BPXPHDC VersaView 1200W Workstation includes a cost-effective platform that is

for demanding environments, application interoperability and the latest technology.

In addition to the numeric keypad, the 6180W-12BPXPHDC workstation has 36 function keys that are programmable and support I/O via optional cards.

In addition to this, the 6180W-12BPXPHDC workstation features two USB ports as well as for serial and parallel communication.

Ethernet (10/100 M) communications and audio connections. In addition, the workstation has a VGA input for connecting an external monitor.

The 6180W-12BPXPHDC workstation features a 24-bit colour TFT display with 800 x 600 pixel resolution.

Two half-length PCI slots and one full-length ISA expansion slot are included. This 1200W workstation variant comes with a 12-inch display size.

This particular performance model features a resistive touchscreen. In addition, the workstation runs on a DC power supply.

It includes a 2 GHz Pentium IV processor as well as 512 megabytes of RAM. The assembly includes 80 GB of hard disc space and a DVD/CD-RW drive.

The input voltage range is 19 to 32 volts DC.

Product Description The 6176M-19PN monitor is a VersaView Series industrial monitor.

designed and manufactured by Allen-Bradley/Rockwell Automation.

It can be used to control and display data from Allen-Bradley VersaView series non-monitor computers.

The 6176M-19PN monitor has a 19-inch wide screen with colour graphics.

The monitor operates in temperatures from 32 to 104 degrees Fahrenheit and is housed in an IP 66 rated enclosure.

The Allen-Bradley 6176M-19PN is a VersaView standard industrial monitor.

It has a 19-inch screen with a native resolution of 1280 x 1024 pixels and a contrast ratio of 800:1.

The flat panel display features a colour active matrix thin-film transistor screen with 16.7 million colours and a typical brightness of 250 cd/lux.

Typical brightness is 250 cd/m2 (nits). The backlight consists of CCFT lamps. Please www.ge-drive.com note that this monitor requires external inputs, specifically a keyboard and mouse.

The 6176M-19PN monitor is mounted on a panel with an aluminium bezel and can be panel or rack mounted.

The monitor has one VGA and one DVI input with automatic selection.

Its rear control buttons are used to set the colour balance, contrast, brightness, video information, image lock, automatic on-screen setting (on-screen display or OSD),

The 6176M-19PN also has USB and RS-232 communication ports.

It has VGA and DVI video signals, and on-screen display (OSD) controls that provide image rotation, screen brightness, and contrast settings.

The monitor has an input voltage of 90-264V AC and a line frequency of 47-63 Hz.

The 6176M-19PN has a power consumption of 3.5 A and a power rating of 42 W. It has an operating temperature range of 32-104 oF.

It has an operating temperature range of 32-104 oF and is rated IP66 and NEMA Type 1/12/4 to protect against water and solid particle debris.

The 6176M-19PN display has an operating shock of 10 grams, 1/2 sine frequency, 11 milliseconds; and an operating vibration of 1 gram peak, 11 milliseconds.

Operating vibration is 1 gram peak, 10-500 Hz sine sweep. The entire display weighs approximately 20 pounds and measures 15.7 x 19 x 2.3 inches.

Allen Bradley VersaView series industrial monitors with 19-inch colour active matrix TFT display,

external input and 90-264V AC input power. Colour active matrix TFT display, external input and 90-264V AC input power.

Description:

The 6155R-NPXPDC computer is an Allen-Bradley industrial computer without a display.

It is a Computer 6155R series computer.The 6155R-NPXPDC computer weighs 11 lbs.

The Allen-Bradley 6155R-NPXPDC computer is a compact industrial computer without a display.

The unit weighs approximately 11 lbs.

The dimensions of the computer (excluding handle and connectors) are 115 x 172 x 158 mm.

The 6155R-NPXPDC computer requires a DC power supply with 9 to 36 volts DC input.

The unit is rated at 35 watts and has a current rating of 3.89 amps at 9 volts DC.

The current rating is 0.97 amps at 36 volts DC.

Environmental specifications for the 6155R-NPXPDC computer include an operating temperature range of 32 to 131 degrees Fahrenheit,

Non-operating temperature range of 32 to 131 degrees Fahrenheit, non-operating www.ge-drive.com temperature range of 4 to 140 degrees Fahrenheit, and non-condensing relative humidity range of 10 to 90%,

15-gram operating shock rating and 30-gram non-operating shock rating.

The 6155R-NPXPDC computer is an enhanced E-Series computer.

The 6155R-NPXPDC computer requires an external monitor.

The processor in this unit is an Intel Celeron M processor rated at 1 Gigahertz.

The 6155R-NPXPDC computer has 2 GB of available memory and the maximum memory supported by the system is also 2 GB.

The 6155R-NPXPDC computer supports 2 CompactFlash Type II card slots.

The I/O ports available on the device include 2 serial ports, 1 PS/2 keyboard port, and 1 PS/2 mouse port,

4 USB 2.0 ports, 1 VGA port, and 1 audio line out port.

The 6155R-NPXPDC computer supports two 10/100/1000 Mbps Ethernet LAN ports.

The 6155R-NPXPDC computer is designed for use in industrial or control room environments that are isolated from the main AC power supply.