Category: A-B

Product Description

The 6177R-MMPW7 computer is an Allen-Bradley/Rockwell Automation VersaView series non-display computer.

It can be equipped with an Allen-Bradley/Rockwell Automation VersaView monitor if the application requires a display.

The 6177R-MMPW7 non-display computer has 4 GB of memory and 500 GB of hard drive storage.

It operates on a voltage range of 100 to 240 VAC and a frequency of 50 to 60 Hz.

The 6177R-MMPW7 non-monitor computer has an operating temperature of 0 www.ge-drive.com to 50 degrees Celsius and a storage temperature of -20 to 60 degrees Celsius.

The Allen-Bradley 6177R-MMPW7 is a machine-mountable, high-performance VersaView 750R non-display industrial computer.

This AC-powered computer uses an Intel Core i3-2120 3.3 GHz processor with 4 GB of DDR3 memory, expandable up to 32 GB.

Note that the 3.5-inch hard drive installed in this computer has 500 GB of memory and uses a SATA interface.

The 6177R-MMPW7 PC is also equipped with a DVD-RW disc drive and four expansion slots.

There is one PCI, one PCI Express x16. one PCI Express x4 and one PCI Express x1 slot.

The I/O ports are 7 USB 2.0 ports (4 rear, 2 front, 1 internal), 1 front and 1 rear USB 3.0 port,

1 parallel port, 2 serial ports, 1 rear eSATAp, 2 PS2 ports, 1 microphone jack, and line-in/line-out jacks.

It also has 2 Ethernet 10/100/1000 LAN ports and 1 DVI-I and 1 DVI-D video ports with VGA support.

A VGA adapter is included with the computer.

The 6177R-MMPW7 is a cabinet computer that measures approximately 14.17 x 6.69 x 15.01 inches and weighs 30.36 pounds.

The 6177R-MMPW7 computer has an auto-range input voltage of 100-240 volts AC and draws 10 amps at 100 volts RMS and 10 amps at 240 volts RMS.

It draws 10 amps at 100 volts RMS and 5 amps at 240 volts RMS and has a line frequency of 50-60 Hz. Operating temperature is 0-50 °C, non-operating temperature is -20-60 °C.

Operating shock is 15 g and non-operating shock is 30 g at ½ sine 11 ms.

VersaView non-display series terminals are equipped with 4GB of DDR3 memory, 1 x 500 GB of storage and 100-240V AC input power.

Product Description.

The 6181P-00N2HW71AC computer is a non-display computer in the Allen-Bradley VersaView family.

It does not have a built-in display like the display computers.The 6181P-00N2HW71AC non-display computer has 100 GB of internal memory and 4 GB of RAM.

If you need to display data, you can connect an external monitor.

The 6181P-00N2HW71AC non-display computer operates on 100 to 240 volts AC.

The 6181P-00N2HW71AC is an Allen-Bradley non-display input terminal. It is a 100GB mountable terminal.

It has one RAM and one flash memory unit. The power range of the machine is 9.88 x 13.89 x 3.96 inches.

It is part of the VersaView NDM terminal product family. It also has an Intel i3-4102E processor.

It has 4GB of RAM, which allows this machine to www.ge-drive.com operate quickly. It also makes the operator’s job easy.

Its input power supply is 120-240 volts AC. It can be mounted on a wall, table, shelf or machine.

The 6181P-00N2HW71AC has a 100GB memory capacity, which allows users to store information and save data for future reference and use.

The 6181P-00N2HW71AC is a non-display model that can be used for control, maintenance and basic information applications.

It has two serial ports. It also has one parallel port and two Ethernet ports, which are particularly suitable for operator communication.

It can be integrated into a computer for displaying operations in industrial environments.

It is easy to use and the operator can use it while controlling a machine in an industrial environment.

The device is equipped with an alphanumeric keypad and a small keypad with function keys that help the operator to easily connect to the machine.

It is located in the CD accessory of the module. The unit’s status hardware provides the user with an economical solution when the surrounding environment is harsh.

The VersaView non-display series terminals are equipped with 4 GB of RAM and 100 GB of storage and have an input power supply of 120-240V AC.

Product Description.

The Allen-Bradley 6186M-15PTSS is an industrial performance monitor: The Allen-Bradley 6186M-15PTSS is an industrial performance monitor.

It features a 15-inch colour active matrix TFT LCD with a native resolution of 1024 x 768 pixels.

It has a resistive touch input interface with a stainless steel bezel. It is powered by an external AC power supply with a voltage range of 100-240 VAC, 47-63 Hz.

It has RGB analogue video input signals and HD-15 VGA and DVI video input connectors.

The 6186M-15PTSS is an industrial performance monitor manufactured by Allen-Bradley.

The monitor can be used with commercially available computers and third-party industrial computers. For Allen-Bradley products.

It is especially compatible with VersaView and industrial non-monitor computers. The monitor has a video input port to provide visualisation.

The 6186M-15PTSS features a 15-inch screen with a native resolution of 1024×768. but optional frequencies and refresh rates are available.

such as 720 x 400 @ 70 Hz; 640 x 480 @ 60 Hz, 75 Hz; 800 x 600 @ 60 Hz, 75 Hz.

1024 x 768 @ 60 Hz, 70 Hz, 75 Hz; 1280 x 1024 @ 60 Hz, 75 Hz, with a response time of less than 35 ms.

The display features resistive touch screen inputs, backlighting and a half-life of 50.000 hours at 25 °C or 77 °F.

The 6186M-15PTSS has an RGB analogue video signal input and provides www.ge-drive.com HD-15 VGA for analogue video signals and DVI for digital video signals.

The 6186M-15PTSS has RGB analogue video signal inputs and provides connectors such as HD-15 VGA for analogue video signals and DVI port for digital video signals. It also has a USB port.

It also has USB interfaces including one (1) Type B USB port for connection to a host computer and two (2) Type A USB 2.0 ports.

Electrical specifications for this industrial monitor include 100-240VAC power requirements and auto switching, line frequency of 47-63 Hz, and power consumption of 34W.

The 6186M-15PTSS industrial performance monitor is housed in a NEMA UL 50 1. 4. 4X, 12. and IP66 rated enclosure.

Required operating temperature is 0…. .55 °C (32…131 °F). .131 °F) and operating shock and vibration of 2 g peak, 10…640 Hz, and 20 g peak, respectively. .640 Hz and 20 g (1/2 sine wave, 11 ms).

The 6186M-15PTSS has two video input connectors on the back of the unit, a High Definition 15-pin Video Graphics Array (HD-15 VGA) input and a Digital Video Interface (DVI) input.

It can provide analogue and digital video signals and transmit video content at a signal capacity of 80MHz.

It has two rear USB 2.0 ports (Type A) and one USB Type B port with a current capacity of 500mA for connecting to host computers and other peripheral devices.

It has a DC power input rated at 9-36V DC using a DIN rail mounted AC power adapter.

The rated voltage is 100-240V AC and the power consumption is 34 W. The 6186M-15PTSS has an operating temperature range of 0 to 55 degrees Celsius.

The 6186M-15PTSS has an operating temperature range of 0 to 55 degrees Celsius and a non-condensing relative humidity of 10 to 90 per cent.

It measures 12.2 x 16.14 x 2.4 inches and weighs approximately 19 pounds.

Description

The 6180P-15BPXPDC display computer is an Allen-Bradley/Rockwell Automation VersaView display computer.

Uses DC power: The 6180P-15BPXPDC display computer is an Allen-Bradley/Rockwell Automation VersaView display computer that uses DC power.

It operates on a range of 18 to 32 volts D.C. The 6180P-15BPXPDC display computer has a 15-inch wide screen that serves as both a display and a touch screen.

The 6180P-15BPXPDC display computer screen is 15 inches wide and serves as both a display and a touch screen. The screen supports full colour graphics.

The 6180P-15BPXPDC display computer also has a keypad for control with the touch screen.

The Allen-Bradley 6180P-15BPXPDC is a VersaView Plus integrated display computer with a keypad and touchscreen.

The computer can be used as an industrial computer or operator input station. It has a 15-inch touchscreen colour active matrix thin film transistor display.

The display area is 12 x 9 inches with a native resolution of 1024 x 768. The display has a response time of 20 milliseconds and can be fitted with an anti-glare cover.

The computer has a horizontal viewing angle of 60Ëš and a vertical viewing angle of 40Ëš. The 6180P-15BPXPDC computer provides 44 function keys.

The entire computer measures approximately 13.97 x 19.01 x 8.86 inches and weighs approximately 38.8 pounds.

The computer has an Intel 945GME system chipset, dual-channel DDR II memory slots, and two DIMM slots.

Up to 2 GB of memory can be installed in each slot, with a maximum of 4 GB of system memory.

It also comes with 1 full-length ISA expansion slot, 2 full-length slots and 1 half-length slot, PCI 2.2. 5V I/O PCI expansion slot.

The 6180P-15BPXPDC features a hot-swappable 3.5-inch SATA-interface 160 GB hard drive and a slim DVD-RW drive.

Available audio jacks include a microphone in jack, line in jack, and line out jack.

The 6180P-15BPXPDC computer also offers multiple input/output ports, www.ge-drive.com including a parallel port, two serial ports, and a DVI port,

4 rear USB ports and 2 front USB ports. The computer also has 2 RJ45 Ethernet LAN ports at 10/100/1000 Mbps.

The cooling system includes a PSU fan, 2 chassis fans, and a processor cooler.

The computer also features Caps Lock, Numeric Lock, Power/Standby and HDD/ODD/FDD activity status indicators.

The 6180P-15BPXPDC has an input voltage of 18-32V DC and a peak inrush current of 20 A at 24V for 5 ms.

It has a power dissipation of 144 W and a power consumption of 144 W (8 A at 18V DC, 4.5 A at 32V DC).

Note that the computer has ACPI-compliant power management. The operating temperature range is 0-55 ËšC, the storage temperature range is -20-60 ËšC.

The non-condensing relative humidity is 20-85% during operation and 5-90% during non-operation.

The 6180P-15BPXPDC has an operating vibration peak of 1g and a non-operating vibration peak of 2g; an operating shock of 15g and a non-operating shock of 30g.

6180P-15BPXPDC Technical Description

The VersaView Plus series is equipped with a 15″ colour display and keypad/touchscreen. Colour display, keypad/touchscreen inputs and 18V-32V DC power supply.

Description: The Allen-Bradley 6176M-19VN monitor is a 19-inch display monitor in the Allen-Bradley/Rockwell Automation VersaView series.

Automation VersaView series, a 19-inch display monitor.

It displays data clearly with colour graphics on an active matrix TFT display.

The 6176M-19VN monitor has a USB port for connecting a mouse and keyboard.

It can also be connected to a non-monitor computer and used as a monitor for that computer.

The 6176M-19VN monitor is rated for input voltages from 90 to 264 volts AC and frequencies from 47 to 63 Hz.

Allen-Bradley’s 6176M-19VN 1900M industrial monitor www.ge-drive.com is a standard industrial monitor.

The 6176M-19VN 1900M Industrial Monitor from Allen-Bradley is a standard industrial monitor that provides an interface through a 19-inch colour active matrix TFT LCD screen. It has a display area of 14.8 x 11.9 in.

The display resolution is 1280 x 1024 pixels with approximately 16.7 million colours. 6176M-19VN has a display brightness of 300 cd/m2 Nits and a display contrast ratio of 800 ratio 1.

The 6176M-19VN has a display brightness of 300 cd/m2 Nits and a display contrast ratio of 800 to 1. It also features an aluminium bezel and CCFT backlighting for 50.000 hours of standby time.

The 6176M-19VN also offers automatic screen setup for easy control of screen contrast, brightness, image lock, colour balance,

synchronisation detection, and vertical and horizontal positioning. Users can set up and maintain analogue and digital video signals via VGA and DVI signal inputs.

The 6176M-19VN uses an AC input power supply rated from 90 to 264 volts AC.

It draws 42 watts at 3.5 amps at 47 to 63 Hz. It has an operating temperature limit of -20 to 60 degrees Celsius (-4 to 140 degrees Fahrenheit).

relative humidity from 10% to 90% (non-condensing), a functional shock rating of 15 G, and a vibration frequency of 53 to 640 Hz with an amplitude of approximately 1 G. The 6176M-19VN is a 3.5 Amp, 47 to 63 Hz, 42 Watt power consumption.

The 6176M-19VN is a panel-mounted industrial display weighing 16.50 lbs. The dimensions are 15.7 x 19.0 x 2.3 inches.

Technical Description of the 6176M-19VN

Allen Bradley VersaView series industrial monitor with 19-inch colour active matrix TFT display, external inputs, and 90-264V AC input power.

Colour active matrix TFT display, external inputs and 90-264V AC input power.

The Allen-Bradley 1336-R1-SP4A PC board or buffer resistor is used for AC inverters,

Power Modules and Buffer Resistor Inverters.

The 1336-R1-SP4A PC board can be used as a buffer resistor spare part kit for power supplies on 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS drives.

The 1336-R1-SP4A PC board can be used as a replacement www.ge-drive.com buffer resistor inverter for the power supply module on 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS drives.

The Allen-Bradley 1336-R1-SP4A Buffer Resistor or PC Board is a spare parts kit for AC drive power supplies, modules, and buffer resistor inverters.

The 1336-R1-SP4A buffer resistor can be used as a replacement buffer resistor for the 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS series.

The 1336-R1-SP4A buffer resistor can be used as a replacement buffer resistor inverter for the 1336 FORCE, 1336 IMPACT, 1336 PLUS II, and 1336 PLUS series drive power modules.

The 1336 IMPACT, 1336 PLUS II, and 1336 PLUS series drives are variable frequency AC drives. The output power ratings for each of these drive series are:

0.37 to 448 kW for 1336 PLUS II drives, 0.37 to 597 kW for 1336 IMPACT drives.

1336 PLUS drive 0.37 to 448 kW.

Buffer resistors such as the 1336-R1-SP4A are designed to eliminate voltage spikes in circuits caused by circuit inductance.

These voltage spikes are generated when a semiconductor or mechanical switch is turned on.

A simple snubber circuit consists of a capacitor and a series-connected snubber resistor across a switch.

The 1336-R1-SP4A snubber resistor is compatible with the Frame F inverters in the Allen-Bradley AC Inverter product line described above.

Each power module requires 3 spare part kits. 1336-R1-SP4A snubber resistors are available for AC drives rated at 250. 300. 250. 400. and 450 hp output power.

The 1336-R1-SP4A buffer resistors are available for AC drives with higher internal voltages and currents.

Only a technician familiar with the Allen-Bradley 1336 AC drives should plan and perform the drive installation and repair process.

Before servicing, ensure that the bus capacitors are fully discharged. Failure to do so may result in electric shock.

The 1492-IFM40F-F24-2 module, manufactured by Allen-Bradley, is a wiring module with fixed terminal blocks.

This module is a digital module. It can be used as part of a wiring system for Allen-Bradley 1492 series digital/analog programmable controllers and connects to Allen-Bradley 1746 series I/O modules.

and connects to Allen-Bradley 1746 series I/O modules. This is a fusible link module.

The 1492-IFM40F-F24-2 module has a voltage range of 10 to 30 volts AC or DC and a maximum current of 2 amps per circuit.

Each module has a maximum current of 12 amps. It measures 8.27 x 3.27 x 2.78 inches.

The 1492-IFM40F-F24-2 module is easy to wire with minimal www.ge-drive.com installation time and wiring errors.

The Allen-Bradley 1492-IFM40F-F24-2 digital wiring module meets CE, cULus, and UL standards.

It has a T3C temperature code of 60 degrees Celsius. The module is also approved for use in Class 1 Division 2 hazardous locations.

The 1492-IFM40F-F24-2 module is designed to function like a set of terminal blocks with multiple cable connectors and I/O points.

It also features a fuse clip and LED indicators that can be customised for various applications.

The module can be mounted on a standard #3 DIN rail.

The 1492-IFM40F-F24-2 Digital Wiring Module features a field-side terminal block for each programmable controller output or input point.

This module is ideal for applications that require common terminals for remote or field terminated I/O devices.

Description of the 1492-XIMTR4024-32R Module

The 1492-XIMTR4024-32R module is an Allen-Bradley 40-pin relay digital interface module.

It has 32 relays and is rated at 24 volts DC.

It is part of the Bulletin 1492 High Density Relay Module, which is half the size and offers improved performance over older relay modules.

The 1492-XIMTR4024-32R module is an Allen-Bradley 40-pin relay digital interface module.

with 32 relays rated at 24 volts DC. It is part of Bulletin’s 1492 family of high-density relay modules.

It is half the size of traditional relay modules with improved performance.

The new relay modules in this series provide 6 amps of switching www.ge-drive.com capacity current (8 amps per pair).

Ideal for installations requiring higher switching capacity than PLC output modules. These new high density relay modules eliminate the need for expansion relay modules.

Both solid state and electromechanical relays can be used with the modules.

The 1492 High Density Relay Modules are compatible with all Allen-Bradley PLC systems and can also be integrated with PlantPAx process automation systems.

Manage motion control, drives, application processes, and safety functions on a single control platform.

The 1492-XIMTR4024-32R module has a maximum repeatable peak voltage of 600 volts AC. Peak current is 2 mA per circuit.

The supported voltage range is 20 to 26 volts DC.

The 1492-XIMTR4024-32R module is CE compliant and cULus compliant for use in non-hazardous locations.

Power supply and input/output wiring must be in accordance with the National Electrical Code Class 1 wiring method.

The recommended operating temperature range for the 1492-XIMTR4024-32R module is 0 to 60 degrees Celsius.

The 1492-XIMTR4024-32R module has a shipping weight of approximately 701 grams and module dimensions of 83 x 240 x 70.5 mm.

The non-condensing relative humidity in the area where the module is to be installed should be maintained between 5% and 95%.

Description The 6189-RPEHA Logic Module is an Allen-Bradley/Rockwell Automation Logic Module in the VersaView CE Series.

It can be used as part of a human-machine interface when connected to a communication module and a display module.

The 6189-RPEHA Logic Module is AC powered and operates from 100 to 240 volts AC.

The 6189-RPEHA Logic Module has an operating temperature range of 32 to 131 degrees Fahrenheit and a non-condensing relative humidity of 10 to 90%.

The Allen-Bradley 6189-RPEHA is a VersaView CE logic module.

Allen-Bradley has discontinued this product and replaced it with the www.ge-drive.com new 2711P-RP7A PanelView Plus CE Logic Module.

It is an intelligent controller that automates machine processes without user intervention.

Its modern, cost-effective and flexible design makes it ideal for complex or simply installed industrial applications.

It is compatible with all VersaView and PanelView Plus CE terminals.

The 6189-RPEHA module requires 100 – 240V AC input power.

For storage, it has a 2711P-RW3 built-in CompactFlash module containing 256 MB of user memory.

It is marine certified and meets the highest standards in the industry. All VersaView devices are now discontinued.

Allen-Bradley has rebranded it as part of the PanelView Plus product family.

It is suitable for use in a clean, dry, overvoltage Class II standard environment with an operating temperature of 0 – 55 °C (32 – 131 °F), an operating shock of 30 g, and a relative humidity of 5 – 90% (non-condensing).

Technical Description of 6189-RPEHA

Discontinued Versaview CE Logic Module with 256 MB RAM, 6189-RW3 internal flash memory, and 100-240 VAC input power.

Description

The Allen-Bradley 1745-LP151 is a programmable logic controller (PLC). This controller is part of the SLC 150 product family.

It comes with embedded twenty (20) 85-132 volt AC inputs; ten (10) 85-265 volt AC triac switch outputs and two (2) relay outputs.

It has an embedded power supply with input supply voltages of 85-132 volts AC/170-265 volts AC; 50/60 Hz.

Allen Bradley’s 1745-LP151 is part of the SLC150 series of programmable controller units.

The part features 12 output terminals and 20 input terminals with a power range of 85-132V AC and CMOS RAM.

This Allen-Bradley SLC 150 processor unit has a High Speed Input (HSI) module capable of counting high speed input signals at rates up to 5kHz.

Up to four high-speed input devices can be counted by each connected unit.

The input voltage level and filter delay time are selectable on the module using dip switches.

Other features of the 1745-LP151 include a voltage range of 85-132/170-265V AC at 50-60 Hz.

Its I/O is twenty 85-132V AC absorption inputs, ten 85-265V AC TRIAC outputs, and two 10-250V AC (10-125V DC) hard contact relay outputs.

The 1745-LP151 unit contains 2 backups: an optional battery backup and a standard capacitor backup.

The 1200-word user memory size has a 0.015-inch peak-to-peak www.ge-drive.com vibration displacement and a peak acceleration of 2.5g at 1Hr/axis.

The 1745-LP151 has an operating temperature range of 32-140°F and a storage temperature range of -40-185°F.

The 1745-LP151 Expansion Unit can be connected to the Processor Unit and other Expansion Units via ribbon cable.

Additional expansions can be made to increase the number of PLC I/O’s to 112.

The Allen-Bradley 1745-LP151 is a programmable logic controller (PLC).

This controller is part of the SLC 150 series, one of the earlier SLC 500 versions.

This controller is used for automation and microprocessor-based control of industrial machines and processes.

It is equipped with a highly programmable memory that allows user programs to be modified and custom designed according to plant requirements.

The 1745-LP151 is a compact controller with an out-of-the-box PLC unit assembly.

It comes with an embedded power supply, I/O channels, communication interfaces, memory modules and mounting accessories.

The PLC’s embedded power supply accepts an input supply voltage of 85-132 volts AC/170-265 volts AC; 50/60 Hz.

The embedded input and output channels consist of twenty (20) 85-132 volt AC inputs;

Ten (10) 85-265 volt AC triac switch outputs and two (2) relay outputs.

If the embedded I/O is not sufficient for the intended control system, expansion modules can be installed to increase the capacity and improve the performance of the module.

Optional expansion units are basic expansion units, relay output expansion units, analogue input expansion units, high speed input modules and other modules.

The PLC is equipped with status LED indicators such as DC power LED; CPU fault LED; low battery; and forced I/O LED.

It also comes with an input power fuse box AC line input protection. This fuse is field replaceable.