Category: A-B

The Allen-Bradley 1757-FFLDC4 is a ControlNet Foundation fieldbus link device.

The module has four (4) Foundation Fieldbus interfaces and one (1) redundant ControlNet interface.

It supports connection to four (4) H1 Foundation Fieldbus networks, each supporting up to sixteen (16) devices.

This link device supports up to 64 fieldbus devices per link device.

The Allen-Bradley 1757-FFLDC4 device is a ControlNet Foundation fieldbus link device.

has four (4) Foundation fieldbus H1 network connections, allowing up to 64 different fieldbus devices to interact in the Foundation network.

It has an additional ControlNet interface for integrating the device into a ControlNet network for monitoring and control purposes.

The ControlNet address of the device should be manually configured www.ge-drive.com using the two rotary switches located on the front left side of the linked device.

The Allen-Bradley 1757-FFLDC4 ControlNet Foundation fieldbus-connected device requires connection to a rated voltage of 24 volts DC (/-10%)

An external power supply rated at 450 mA. It has an inrush current rating of 1.5 amps and a power consumption of 9.6 watts.

A forced ventilation system or climate control system may be required depending on the total heat emitted by all components mounted within the same panel.

Maximum operating temperature should be kept below 60 degrees Celsius (140 degrees Fahrenheit).

The Allen-Bradley 1757-FFLDC4 ControlNet Foundation Fieldbus Connection Device is sized for easy installation on a DIN rail or in any conventional NEMA 4/12 type enclosure.

The most common DIN rails used to mount this connection device are 35 x 7.5 or 35 x 15 DIN rails.

The 1757-FFLDC4 is a panel mount device and is mounted using M4 or #8 screws.

The unit specifically features four (4) Foundation Fieldbus interfaces and one (1) redundant ControlNet interface.

Up to four (4) H1 Foundation Fieldbus networks can be bridged via ControlNet media, each supporting up to sixteen (16) devices.

In total, one (1) 1757-FFLDC4 is capable of connecting up to sixty-four (64) fieldbus devices.

The 1757-FFLDC4 can operate when supplied with a 24VDC supply voltage. It is rated at 450 milliamps, with an inrush current rating of 1.5 amps and a power consumption/consumption of 9.6 watts.

This connected device is capable of retaining a programme for up to 21 days when no power is present.

For DC power connections, the 1757-FFLDC4 requires 0.2-1.5 mm2 or 26-16 AWG solid or stranded copper signal wire.

It has an insulation rating of 75°C or 167°F or greater and a maximum insulation thickness of 1.2 mm (3/64 in.).

For fieldbus connections, the recommended wire size is 0.8 mm2 (18 AWG) solid or stranded shielded twisted-pair copper wire with insulation thickness and temperature ratings.

rated for 75°C (167°F) or higher with a maximum insulation thickness of 1.2 mm (3/64 in.). To establish an Ethernet connection, Category 5e cable may be used.

Description

Allen-Bradley PLC 5 high resolution TC/millivolt inputs, natural binary data format, 750 mA backplane current, no external power supply required.

The Allen-Bradley 1771-IXHR is a PLC 5 analogue input module. It is a high-resolution thermocouple/millivolt input module that

used to transfer input data words from its memory to the PLC processor’s data table and to transfer configuration words using block transfer programming.

The 1771-IXHR requires a slot in the 1771 I/O chassis and does not require an external power supply.

The 1771-IXHR module has eight floating differential www.ge-drive.com inputs for thermocouple or millivolt input ranges.

Includes thermocouple types B, E, J, K, T, R, and S and ±100 millivolts. Allows 8 inputs of the same type or allows 4 inputs of different types.

The 1771-IXHR includes cold-end compensation with an accuracy range of 0-60°C and ±0.5°C. It has selectable temperature scales of °C or °F with a temperature resolution of 0.1°C or 0.1°F and a millivolt resolution of 1µV.

It requires a backplane current load of 750mA at 5V and has a channel update time of 25ms per 8 channels.

Its wiring is connected to the 1771-WI field wiring arm, eliminating the need to disconnect the wiring when replacing the module.

The 1771-IXHR has a maximum power consumption of 4.255W and a maximum heat dissipation of 14.5 BTU/hour.

The keying strap must be placed between pins 20-22 and pins 24-26 to accept only this module.

The 1771-IXHR module has user-selectable high and low temperature alarms.

It contains a green RUN indicator and a red FLT indicator on the front panel to indicate power and fault status.

When powered on, it performs self-diagnostics and reports status.1771-IXHR provides open-circuit detection in the event of a thermocouple failure.

It automatically calibrates the offset and gain of each channel without potentiometers.

Description

Allen-Bradley PLC 5 high resolution TC/millivolt inputs, natural binary data format, 750 mA backplane current, no external power supply required.

The Allen-Bradley 1771-IXHR is a PLC 5 analogue input module. It is a high-resolution thermocouple/millivolt input module that

used to transfer input data words from its memory to the PLC processor’s data table and to transfer configuration words using block transfer programming.

The 1771-IXHR requires a slot in the 1771 I/O chassis and does not require an external power supply.

The 1771-IXHR module has eight floating differential inputs for thermocouple or millivolt input ranges.

Includes thermocouple types B, E, J, K, T, R, and S and ±100 millivolts. www.ge-drive.com Allows 8 inputs of the same type or allows 4 inputs of different types.

The 1771-IXHR includes cold-end compensation with an accuracy range of 0-60°C and ±0.5°C. It has selectable temperature scales of °C or °F with a temperature resolution of 0.1°C or 0.1°F and a millivolt resolution of 1µV.

It requires a backplane current load of 750mA at 5V and has a channel update time of 25ms per 8 channels.

Its wiring is connected to the 1771-WI field wiring arm, eliminating the need to disconnect the wiring when replacing the module.

The 1771-IXHR has a maximum power consumption of 4.255W and a maximum heat dissipation of 14.5 BTU/hour.

The keying strap must be placed between pins 20-22 and pins 24-26 to accept only this module.

The 1771-IXHR module has user-selectable high and low temperature alarms.

It contains a green RUN indicator and a red FLT indicator on the front panel to indicate power and fault status.

When powered on, it performs self-diagnostics and reports status.1771-IXHR provides open-circuit detection in the event of a thermocouple failure.

It automatically calibrates the offset and gain of each channel without potentiometers.

Description

Allen-Bradley PLC 5 high resolution TC/millivolt inputs, natural binary data format, 750 mA backplane current, no external power supply required.

The Allen-Bradley 1771-IXHR is a PLC 5 analogue input module. It is a high-resolution thermocouple/millivolt input module that

used to transfer input data words from its memory to the PLC processor’s data table and to transfer configuration words using block transfer programming.

The 1771-IXHR requires a slot in the 1771 I/O chassis and does not require an external power supply.

​The 1771-IXHR module has eight floating differential inputs for thermocouple or millivolt input ranges.

Includes thermocouple types B, E, J, K, T, R, and S and ±100 millivolts. www.ge-drive.com Allows 8 inputs of the same type or allows 4 inputs of different types.

The 1771-IXHR includes cold-end compensation with an accuracy range of 0-60°C and ±0.5°C. It has selectable temperature scales of °C or °F with a temperature resolution of 0.1°C or 0.1°F and a millivolt resolution of 1µV.

It requires a backplane current load of 750mA at 5V and has a channel update time of 25ms per 8 channels.

Its wiring is connected to the 1771-WI field wiring arm, eliminating the need to disconnect the wiring when replacing the module.

The 1771-IXHR has a maximum power consumption of 4.255W and a maximum heat dissipation of 14.5 BTU/hour.

The keying strap must be placed between pins 20-22 and pins 24-26 to accept only this module.

The 1771-IXHR module has user-selectable high and low temperature alarms.

It contains a green RUN indicator and a red FLT indicator on the front panel to indicate power and fault status.

When powered on, it performs self-diagnostics and reports status.1771-IXHR provides open-circuit detection in the event of a thermocouple failure.

It automatically calibrates the offset and gain of each channel without potentiometers.

Description

Allen-Bradley PLC 5 high resolution TC/millivolt inputs, natural binary data format, 750 mA backplane current, no external power supply required.

The Allen-Bradley 1771-IXHR is a PLC 5 analogue input module. It is a high-resolution thermocouple/millivolt input module that

used to transfer input data words from its memory to the PLC processor’s data table and to transfer configuration words using block transfer programming.

The 1771-IXHR requires a slot in the 1771 I/O chassis and does not require an external power supply.

The 1771-IXHR module has eight floating differential inputs for thermocouple or millivolt input ranges.

Includes thermocouple types B, E, J, K, T, R, and S and ±100 www.ge-drive.com millivolts. Allows 8 inputs of the same type or allows 4 inputs of different types.

The 1771-IXHR includes cold-end compensation with an accuracy range of 0-60°C and ±0.5°C. It has selectable temperature scales of °C or °F with a temperature resolution of 0.1°C or 0.1°F and a millivolt resolution of 1µV.

It requires a backplane current load of 750mA at 5V and has a channel update time of 25ms per 8 channels.

Its wiring is connected to the 1771-WI field wiring arm, eliminating the need to disconnect the wiring when replacing the module.

The 1771-IXHR has a maximum power consumption of 4.255W and a maximum heat dissipation of 14.5 BTU/hour.

The keying strap must be placed between pins 20-22 and pins 24-26 to accept only this module.

The 1771-IXHR module has user-selectable high and low temperature alarms.

It contains a green RUN indicator and a red FLT indicator on the front panel to indicate power and fault status.

When powered on, it performs self-diagnostics and reports status.1771-IXHR provides open-circuit detection in the event of a thermocouple failure.

It automatically calibrates the offset and gain of each channel without potentiometers.

Description

The Allen-Bradley 2711-K10G9L1 terminal is a standard operator terminal produced as part of the Allen-Bradley/Rockwell Automation Panelview 1000 series.

The 2711-K10G9L1 terminal is a standard operator terminal manufactured as part of the Allen-Bradley/Rockwell Automation Panelview 1000 series. It is a DC-powered operator terminal that supports greyscale graphics only.

The 2711-K10G9L1 operator terminal has a 10-inch wide screen. This terminal is a keypad type terminal.

The 2711-K10G9L1 operator terminal’s keypad includes several different keys such as navigation keys, numeric keys, and function keys.

The Allen-Bradley 2711-K10G9L1 terminal is a keypad/touch operator interface terminal www.ge-drive.com that is part of the PanelView family of standard terminals.

Specifically, the 1000 terminal sub-series is used to control and supervise any industrial application activity.

The terminal provides supervisors with all the information they need to check the status of the different devices in the network, send and receive data, and make on-the-fly changes to processes.

The device was developed by Allen-Bradley. the key benefits of the 2711-K10G9L1 Interface Terminal are.

Operators can monitor different processes from a specific location, saving travel time and inventory costs.

It is important that its installation and programming process is carried out by a qualified expert to avoid problems during operation.

It is also important to follow all the steps mentioned in the installation manual.

The keypad of the Allen-Bradley 2711-K10G9L1 Keypad/Touch Operator Interface Terminal is made of stainless steel film.

It includes navigation and function keys, all of which have a press count of 1 million.

Notably, the keypad makes monitoring and inserting new variables and data very easy.

The communication option for the Allen-Bradley 2711-K10G9L1 Keypad/Touch Operator Interface Terminal is an RS-232 (DH-485) port with printer.

It has 310 kilobytes of RAM and 1008 kilobytes of nonvolatile memory.

Memory can be expanded using compatible memory cards from the Allen-Bradley accessory catalogue.

It has a 10-inch screen and has a shipping weight of approximately 7.2 lbs.

Technical Description of the 2711-K10G9L1

Keypad-RS-232 (DH-485) communications and RS-232 printer port 10-inch greyscale display.

Description of the Allen-Bradley 5069-OB16 Discrete Output Module

The Allen-Bradley 5069-OB16 is a compact 5000 discrete output module.

The module has sixteen (16) single gang source output channels and operates over a 10-32VDC voltage range.

At 10…. .32V DC, each channel provides 0.5 A resistive output current; at 10…. .32V DC, each module can provide a maximum of 8 A resistive output current.

The module can be used as a local I/O or distributed I/O component. It uses the 5069-RTB18-SPRING RTB and 5069-RTB18-SCREW RTB.

The Allen-Bradley 5069-OB16 is a discrete output module that is part of the Compact 5000 I/O product family.

It has an output voltage range of 10-32VDC and a nominal output of 24VDC.

Output current is rated at 0.5 A resistor per channel (10…. .32V DC) per channel and 8 A resistive (10…32V DC) per module. .32V DC) per module.

Each channel can withstand a maximum inrush www.ge-drive.com current of 1 A at 10 ms per point, repeated every 2 seconds.

Similar to other output modules, this module is primarily used to energise and drive electrical loads. However, the 5069-OB16 is compatible with devices operating at 12/24VDC.

The module has a minimum on-state voltage of 10VDC, a maximum of 32VDC, and a minimum on-state current of 1 mA per channel.

The output delay time for each channel is 100 µs, ±10 µs @ 25 °C (77 °F) @ 0.5 A for ‘on’ to ‘off’ and ‘off’ to ‘on’ transitions.

The minimum pulse width of the module output is 200 µs @ 0.5 A @ 25 °C (77 °F).

The 5069-OB16 has internal filter brownout detection, no-load detection for each channel, and individual output short-circuit, output overload, and overheat detection for each channel.

It is also equipped with reverse polarity detection and overvoltage detection rated at 36VDC. The module is protected by an internal fuse.

The 5069-OB16 outputs can be controlled even if the controller or module has entered fault mode, programme mode and fault states.

Configurable states include Hold Last, On, and Off (default settings).

The module has a non-operating shock of 50g (3 pulses, 11 ms). The module has a vibration of 5g at frequencies from 10 to 500 Hz.

The module weight is approximately 175 grams (0.39 lbs). The module’s housing style is none (open housing).

The Allen-Bradley 5069-OB16 has an electrostatic discharge immunity of 6 kV for contact discharge and 8 kV for air discharge.

The voltage class of the Allen-Bradley 5069-OB16 is 12-24 VDC supply. Outputs are 16 channels (1 bank of 16).

The module has a maximum power dissipation of 3.25 W (16 channels, 0.5 A). The module has a maximum thermal dissipation of 11.09 BTU/hour.

The module has 1 green/red module status LED and 16 yellow/red I/O status LEDs.

The Allen-Bradley 5069-OB16 is sensitive to electrostatic discharge, which can cause internal damage and affect operation.

Never touch connectors or pins on the component board, never touch circuit components inside the unit, and always use a static-free workstation.ousing.

Product Description

The Allen-Bradley 6180W-15BPXPH is a VersaView industrial workstation.

It is a high performance computer with touch and keyboard inputs, Intel Pentium 4 Celeron 2GHz processor,

512 MB of Random Access Memory (RAM), 15-inch screen, and 90½-264V AC auto or 19-32V DC external power supply.

The 6180W-15BPXPH is a VersaView industrial workstation manufactured by Allen-Bradley. The workstation is a complete system that can be used as an operator or engineering workstation.

The 6180W-15BPXPH is equipped with a 15-inch colour active matrix thin-film transistor (TFT) with a display area of 305 x 229 mm (12 x 9 inches).

It has dual input interfaces such as an analogue resistive touchscreen and 32 function, numeric and alphabetic keys.

It also has various interfaces such as printer port, audio output, Ethernet www.ge-drive.com communication port, PS2 keyboard, mouse, USB and VGA port. It also has a 3.5-inch floppy drive and an optical drive.

It also has a hard disc drive (HDD) with 80 GB of storage capacity and 512 MB of random access memory (RAM) installed.

The industrial workstation requires an external power supply of 90-264VAC (with automatic switching) or a DC voltage source of 19-32VDC.

The industrial workstation has an operating temperature of 0-50 °C (32-122 °F) and an operating vibration of 0.006 inches p-p (10…57 Hz). .57 Hz).

.57 Hz); 1 g peak (57….500 Hz), and an operating vibration of 0.006 in. .500 Hz), with an operating shock of 15 g (1/2 sine wave, 11 ms).

The 6180W-15BPXPH touch screen supports calibration for more sensitive and accurate operation.

The 6180W-15BPXPH also has a Basic Input/Output System (BIOS) that can be updated, but make sure that the power supply is not interrupted while the BIOS update is being performed.

Description.

The 2711-M3A19L1 Operator Terminal is a miniature operator terminal in the Allen-Bradley/Rockwell Automation Panelview 300 Series.

The screen of this miniature terminal is only 3 inches wide. In addition, the 2711-M3A19L1 www.ge-drive.com miniature operator terminal’s screen displays only monochrome graphics.

The 2711-M3A19L1 Miniature Operator Terminal uses a 24 Vdc input power supply.The 2711-M3A19L1 Miniature Operator Terminal has a keypad with four navigation arrow keys and four programmable function keys.

2711- Does the M3A19L1 have a printer port?

The 2711-M3A19L1 does not have a printer port.

2711-M3A19L1 Technical Description

The Allen-Bradley 2711-M3A19L1 is a Panelview Standard 300 miniature operator terminal.

The operator terminal is powered by an external 18-32VDC power supply and features a 3-inch monochrome display and an 8-pin RS232 interface that supports the DH485 protocol.

It has four (4) function keys and a keypad operator interface.

Product DescriptionThe Allen-Bradley MPL-B580F-MJ72AA servo motor is part of the MPL series of servo motors.

It has a rated rotor speed of 3000 RPM.The MPL-B580F-MJ72AA servomotor is equipped with a rotatable round DIN connector.

About the MPL-B580F-MJ72AA

The Allen-Bradley MPL-B580F-MJ72AA MPL series servomotor is a brushless AC servomotor with permanent magnet technology.

The MPL-B580F-MJ72AA servomotor is a low inertia servomotor that is designed for 400 VAC input voltage.

The MPL-B580F-MJ72AA servomotor is a low-inertia servomotor that belongs to the Allen-Bradley/Rockwell Automation MPL series of permanent magnet servomotors.

Features of the MPL series servomotors include low rotor inertia and large torque-to-size ratios.

MPL-B580F-MJ72AA servomotors have a minimum protection rating of IP 50. With sealed cable connectors and shaft seals, the protection rating can be increased to IP 66.

With sealed cable connectors and shaft seals, the protection rating can www.ge-drive.com be increased to IP 66. The servo motors are UL listed and CE certified.

The cable catalogue number compatible with MPL series motors is 2090-CxxM7xx.

The MPL-B580F-MJ72AA servo motor is compatible with a variety of Kinetix servo drives.

Industrial applications for this motor include packaging, automotive, and process applications.

The Allen-Bradley MPL-B580F-MJ72AA MPL series brushless AC servo motor supports a rated rotor speed of 3000 RPM.

It is equipped with a 1024 sin/cos multiturn absolute encoder. The shaft is keyed but does not include a shaft seal unless an optional shaft seal is installed.

The servo motor connector is a rotatable SpeedTec circular DIN connector.

The motor does not come with a holding brake, but a holding brake is optional.The MPL-B580F-MJ72AA servomotor has a frame size of 165 mm.

The servomotor has a magnet stack length of 8 inches.

The MPL-B580F-MJ72AA servomotor is rated at 301 lb/in continuous stall torque and 770 lb/in peak stall torque.

The motor’s rated output power is 7.1 kW. The MPL-B580F-MJ72AA servomotor has a shipping weight of 56 lbs.