Category: A-B

Allen-Bradley 1771-A4B is a general purpose I/O enclosure.

The Allen-Bradley 1771-A4B is a general purpose I/O chassis.

The hardware is a sixteen (16) slot chassis designed to provide backplane connections and to accommodate 1771 PLC modules.

It provides a maximum backplane current of 24 A and is designed for panel mounting. It has a total weight of 7.3 kg or 16 lbs.

About the 1771-A4B

The Allen-Bradley 1771-A4B is a general purpose I/O chassis that is part of the 1771 Programmable Logic Controller (PLC) product family.

The chassis has sixteen (16) I/O slots that contain electronic circuitry, specifically the backplane, which distributes power to the connected modules.

It is also equipped with hinges for field wiring arms.

The 1771-A4B has an operating temperature range of 32-140 degrees Fahrenheit or 0-60 degrees Celsius.

Hardware storage temperature is -40 to 185 degrees Fahrenheit or -40 to 85 degrees Celsius.

Relative humidity is 5-95% non-condensing. When installing this general purpose I/O chassis, panel vibration and shock should be kept within 2g and 15g at 10-500 Hz, respectively.

The 1771-A4B receives power from the 1771 processor and has an internal power supply that provides 2-4 amps,

The built-in power supply provides 2-4 amp, 3-8 amp rated output power modules, and an external power supply with 6.5-16 amp output current.

In general, do not install external power supplies and power supply modules on the 1771-A4B. Such power connections are incompatible and will result in a substandard hardware configuration.

The 1771-A4B chassis has 16 I/O slots. It measures 12.4 x 24 x 7.6 inches and www.ge-drive.com weighs 14.8 pounds.

When installed in a 1771 PLC-5 system, it utilizes the backplane mounting method with adequate spacing and an open enclosure.

The backplane of the enclosure has a DC voltage of 5 volts and a current of 8 amps.

The 1771-A4B chassis has a universal configuration for chassis mounting and system design due to the consistency of its design.

Small, flexible, and cost-effective, the 1771 I/O modules provide a complete line of digital, analog, and intelligent I/O modules for a variety of applications.

The I/O modules are equipped with wiring arms and remote termination panels that allow the modules to be replaced without disconnecting the wiring.

For troubleshooting and diagnostics, status indicators are provided on the front of the module. For future expansion, it can be easily replaced with a larger chassis.

It is suitable for industrial environments from 0 – 60 degrees Celsius (32 – 140 degrees Fahrenheit).

It is intended for use in industrial environments with an operating temperature of 0 – 60 degrees Celsius (32 – 140 degrees Fahrenheit), 5 – 95% non-condensing relative humidity, and 30g of operating shock.

1771-A4B Frequently Asked Questions

How many I/O slots does the 1771-A4B have?

The 1771-A4B has 16 I/O slots.

What is the maximum backplane current rating of the 1771-A4B?

The maximum backplane current for the 1771-A4B is 24 amps.

What mounting options does the 1771-A4B support?

The 1771-A4B supports panel mounting.

Technical Description of the 1771-A4B

Allen Bradley PLC 5 I/O Chasis, 16-slot, 24 amp, backplane mount type.

Related Product Recommendations:

A4K06186 Module Interface Boards

IOP371 Expander Module

D201138 IBC Controller Module

D200175 Module

D201190 Output Module

D201189 Input Module

IOP114-4W/6W Input Module

MV6100COMI Controller Module

A413281 Communication Module

080422 Analog Module

DeltaVrm VerticalPlus Input/Output Subsystem carrier

BSFC-02C Charge Controller Universal Brake Chopper

C150/0000/STD DIN Universal Process Indicator

Allen-Bradley® MP Series

Low-inertia, high-output brushless servomotors incorporate innovative design features that significantly increase torque while reducing motor size.

These compact, highly dynamic brushless servomotors from Rockwell Automation are designed to meet the demanding requirements of high-performance motion systems.

This series of servo motors is commonly used with Allen-Bradley Kinetix® 6000. Kinetix 6200. Kinetix 6500.

Kinetix 300. and Kinetix 350 servo drive families.

These motors are available in nine frame sizes and offer continuous stall torque from 0.26 to 163 Nm (2.3-1440 lb-in) and peak torque from 0.77 to 278 Nm (6.8-2460 lb-in).

MP Series low-inertia motors are available:

– Innovative winding technology that delivers up to 40% more torque www.ge-drive.com per unit size than conventional servomotors

– Improved winding insulation for enhanced thermal management and heat transfer for improved performance

– High-energy rare earth magnets for faster acceleration

– New SpeedTEC DIN connectors allow free positioning of connectors and a single cable family for all MP series motors

– Integrated 24 volt brake option

– Wide torque range – all motors in the same series

– Optional shaft seal with IP 66 environmental rating

– Standard IEC 72-1 mounting dimensions

– Operating Temperature Range 0 – 40º C (32 – 104º F)

– MP Series low inertia motors are UL recognized for components meeting applicable UL and CSA standards and CE certified for compliance with all applicable directives.

High Performance Feedback

MP Series low inertia motors are equipped with high performance encoders with a choice of single or multi-turn high resolution feedback.

– Up to 2 million counts per revolution for smooth performance and precise control (MPL-A/B3xx, -A/B4xx, -A/B45xx, -A/B5xx, -B6xx, -B8xx and -B9xx motors)

– Up to 260.000 counts per revolution for smooth performance and precise control (MPL-A/B15xx and -A/B2xx motors)

– Multiturn encoder provides high-resolution absolute position feedback over 4096 turns. Electromechanical Design Requires No Batteries

– MP-Series servo motors with high-resolution encoders can be used as components of the Kinetix safety shutdown feature Smart Motor Technology

– Onboard memory retains motor identification

– Communication link automatically reports identity to system at startup to reduce commissioning time

Connectors and Cables

The new SpeedTEC DIN connector for MP-Series low inertia motors allows for flexible connector positioning and a single cable family for all MP-Series motors.

The SpeedTEC DIN connector is designed to provide a quick quarter-turn connection. This makes servo connections simple and safe.

The connector meets the requirements of various codes and standards:

– UL recognized

– NFPA 79 compliant

– DESINA cable sheath coloring

– Tray cable rating

– RoHS and REACH compliant

– 600V insulation class

Motor Cables

Rockwell Automation offers a comprehensive line of power, feedback, and brake cables for your MP-Series motors.

Products include standard and continuous power cables in lengths ranging from 1 to 90 meters.

Continuously energized and braked cables are RoHS and NFPA-79 tray rated and consist of UL listed bulk cable. Sheath colors conform to DESINA specifications.

Motor Accessories

Shaft seal kits are available for all frame sizes of MP-Series low inertia motors. When properly installed, the shaft seals are IP66 rated.

Please note that shaft seals are wearing parts and need to be replaced periodically.

Motor end connector kits are available for most MP Series motors. These kits are available for customers who choose to make their own cables.

These kits utilize a metal backshell, a compression-sealed cable jacket, and either a soldered or crimped connector receptacle (depending on the kit).

Crimp tools are supplied by Rockwell Automation for use with crimp style receptacles.

Description of the Allen-Bradley 1336-FAN-SP5A

The Allen-Bradley 1336-FAN-SP5A is an assembly for Bulletin 1336 drives.

This unit is a cooling fan that mounts on the side of the heat sink of the 1336 Plus, Plus II, Impact, and Force drives. For use with G and H model hard drives.

About the 1336-FAN-SP5A

The 1336-FAN-SP5A is a replaceable cooling assembly that installs on Allen-Bradley’s 1336 Plus,

Plus II, Impact, and Force adjustable frequency AC drives from Allen-Bradley. The fan is mounted on the heatsink side of the Frame H and G drives.

It is a Class 3 component of the 1336 drive and is labeled FAN in the Troubleshooting Symbols Guide. a C-HB1 cap is included.

Outputs 250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP, or Frame G drives and 700 HP drives.

One (1) of these assemblies is used per drive for 250 HP, 300 HP, 350 HP, 400 HP, 450 HP, 500 HP, 600/650 HP, or Frame G drives and 700 HP, 800 HP, or Frame H drives.

Since the entire 1336 drive has been phased out, this component has also been declared obsolete.

Since Rockwell Automation no longer manufactures this product, this part is only available as a spare part.

Fans are an important part of almost all compact units. The power dissipation of Rack G and Rack H drives ranges from the relative parameters to the fan performance.

can be found under drive parameter 70 (heat sink temperature). The minimum value for this parameter is 0. The maximum value is 255 degrees Celsius, but the drives operate at temperatures from 0 to 50 degrees Celsius.

In addition to the integrated fan, the hard disk’s environment can be properly maintained at the specified operating temperature by following the required mounting clearances and installing an appropriate climate control device.

It is important to note that the fan exhausts air from the hard disk, which means that hot air from the hard disk remains in the case.

An enclosure fan can be installed to pull air from the enclosure to continuously remove hot air from outside the panel.

The Allen-Bradley 1336-FAN-SP5A Heatsink Fan Replacement Kit with Fan Capacitor is for the

Allen-Bradley 1336 Plus, Plus II, Force, Impact, and Force Frame G and

H adjustable AC drives (known as Fan 2). It provides cooling and temperature control for the drive.

The package includes a fan with leads, sealant, a connector with leads, 2 fittings, and a grommet.

The 1336-FAN-SP5A replacement fan is mounted on the side of the www.ge-drive.com drive heatsink near the bottom of the inverter enclosure.

The 1336-FAN-SP5A heatsink fan kit can be securely installed on the hard disk by following these steps:

(1) disconnecting power from the hard disk, (2) routing the wires from the kit assembly through the hard disk opening, (3) installing the supplied grommet in the fan wire opening.

(4) connect the fan wires together using the supplied lugs, (5) connect the fan connector (harness) and secure the fan cover to the fan using the supplied captive screws.

(6) Apply the supplied sealant to the wires at the chassis holes to seal and prevent unwanted particles from entering, (7) Open the hard disk and monitor it for proper airflow.

The 1336-FAN-SP5A Side Radiator Fan Replacement Kit has an ambient operating temperature range of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).

The ambient operating temperature range for the 1336-FAN-SP5A side radiator fan replacement kit is 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).

The ambient operating temperature range for the 1336-FAN-SP5A side radiator fan replacement kit is 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit) with a relative humidity of 5% to 95% (non-condensing) and a storage temperature range of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).

Storage temperature range is 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).

Technical Notes for 1336-FAN-SP5A

Allen Bradley-FAN radiator flanks the 1336STG frame G inverter.

Product Description

The 1336E-B030-AN-EN-GM1-HA2-L7E inverter is an Allen-Bradley/Rockwell Automation adjustable frequency inverter.

Part of the 1336 IMPACT series, the 1336E-B030-AN-EN-GM1-HA2-L7E inverter smoothly varies the rated speed and torque of an AC motor using its adjustable frequency.

It has a rated input voltage of 380 to 480 volts AC and a rated output of up to 30 horsepower.

The 1336E-B030-AN-EN-GM1-HA2-L7E adjustable frequency inverter’s built-in interfaces make it easy to control, and all interfaces operate and display data in English.

About the 1336E-B030-AN-EN-GM1-HA2-L7E

The 30 hp 1336E-B030-AN-EN-GM1-HA2-L7E drive is an Allen-Bradley AC drive that is part of the Allen-Bladley 1336 IMPACT product family.

For the Rack C 1336E-B030-AN-EN-GM1-HA2-L7E drive, the outputs www.ge-drive.com and inputs are connected to TB1. which is the 11-position terminal block on the gate drive board.

National wiring codes should be considered during wiring to minimize the risk of injury and equipment damage.

The drive control interface supports TTL contacts. Encoder feedback is also provided on the drive.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive is available with an output power of 22 kW or 30 hp at 380 to 480 volts AC input voltage.

Output current and apparent power ratings are 48.2 amps and 38 kVA, respectively.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive draws 49 amps and 32 to 41 kVA at the input.

The input and output frequency ranges are 47 to 63 Hz and 0 to 250 Hz, respectively.

The driver output is capable of sustaining 100% of the rated current continuously or 150% of the rated current for up to 1 minute.

The maximum short circuit rating is 200.000 amps RMS symmetrical. The HMI is part of the standard driver package, which includes the controller and programmer.

Digital potentiometers are also available on the driver. The drive has an English language module. For network communications, the drive has a single point remote I/O interface.

The 1336E-B030-AN-EN-GM1-HA2-L7E drive is an open drive with an IP00 enclosure.

The recommended operating ambient temperature range is 32 to 122 degrees Fahrenheit. The drive has a shipping weight of 38.6 kg.

The dimensions of the drive rack are 701 x 301.8 x 225.0 mm.

1336E-B030-AN-EN-GM1-HA2-L7E Technical Description

This 1336 PLUS II Adjustable Frequency AC Drive is a 380-480 VAC unit with 22 (30) kilowatts (horsepower) and has a(n) open (IP00) enclosure.

The Allen-Bradley® Stratix® 5800 managed industrial Ethernet switch delivers Gigabit performance in a flexible package.

Its fixed and modular design supports a variety of copper, fiber, and PoE expansion modules, and offers Layer 2 switching or Layer 3 routing firmware options to meet a variety of application needs.

When used as a Layer 2 switch, the Stratix 5800 is ideal for high-performance end devices.

When used as a Layer 3 switch, routing can be enabled between segmented networks to improve performance and prevent unwanted network traffic.

Network segmentation helps simplify security management by establishing trust domains and improving efficiency.

The Stratix 5800 includes a robust set of switching, routing, and security features www.ge-drive.com to support a wide range of architectures and uses the Cisco IOS-XE operating system to optimize compatibility with enterprise environments.

Choosing a switch co-developed by Rockwell Automation and Cisco allows your operations technology (OT) and information technology (IT) professionals to leverage the tools and techniques they are familiar with.

By helping to provide optimized integration, you can experience easier commissioning and actionable diagnostics.

Features and Benefits

– Full Gigabit switch platform High-performance networking support

– Fixed and modular options with up to 26 ports for flexibility and scalability

– Multiple copper, fiber and PoE options to support a variety of applications

– Supports Layer 2 access switching and Layer 3 routing for use in multi-tier architectures

– Supports IT and OT configuration and management tools, enabling users to leverage the expertise of both teams

– Provides default configurations for industrial applications for easy setup and optimized performance

– IEC 62443-4-2 certified for compliance with global cybersecurity standards

Optimized integration

– Studio 5000® Add-On Profiles (AOPs) enable optimal integration with Rockwell Automation® Integrated Architecture® systems.

Integration into Rockwell Automation® Integrated Architecture® Systems

– Predefined named Logix tags for monitoring and port control

– FactoryTalk® View panel for status monitoring and alarming

– Embedded Cisco® technology, including the IOS-XE operating system, facilitates secure integration with corporate networks

Our Kinetix® 5700 servo drives are designed for machines with large axes and high power requirements.

These high-performance servo drives utilize leading-edge technology designed to help you build machines that are more capable, more flexible, and more energy efficient than ever before.

The Kinetix 5700 servo drives utilize EtherNet/IP communication technology that

Complete your Logix control system with fast access to the data you need, while simplifying your system by using one network to integrate motion and safety functions.

New Features

Tuning-Free Startup and Operation

The Kinetix 5700 server’s V13 firmware has updated features that reduce or eliminate debugging efforts.

Enhancements include.

Virtual Torque Sensor feature detects anomalies and provides analysis

Adaptive tuning now includes multiple tracking trap filters and improved filter configurations.

Command trap filters reduce load oscillation in applications without load sensors

Supports 200V and 400V rated motors

OVERVIEW

High-performance Kinetix 5700 servo drives help meet the demands of demanding applications in a wide range of industries.

These multi-axis servo drives combine high-performance servo and vector motor control to help simplify machine design and reduce the time and labor costs required for integration.

Kinetix 5700 servo drives can be configured with integrated drive safety www.ge-drive.com and regenerative bus power to help make your next servo solution safer and more energy efficient than ever.

Functional Features

Kinetix 5700 Servo Drive

Delivers high power density in a compact rack size

Offers a wide power range of 1.6…. .112 kW wide power range

Supports servo and induction motors with a wide range of feedback types

Features a dual-axis module

Innovative snap-in bus system for easy assembly and installation

Supports single-cable solutions for motor power and feedback

Includes dual Ethernet ports to support linear and device level ring (DLR) topologies

CIP security features support defense-in-depth approach to network security

Kinetix 5700 Integrated Safety Servo Drive

Includes integrated or hard-wired safety options

Integrated safety option reduces overall system wiring

Advanced safety features with Safe Torque Off, Safe Stop and Safe Monitor functions

Kinetix 5700 Regenerative Bus Power

Helps reduce overall energy consumption by regenerating excess energy

Performs common DC bus voltage regulation over the entire AC input voltage range

On-board diagnostics for power quality monitoring provide real-time analysis via EtherNet/IP

Integrated LC filter reduces installation costs and cabinet space

Tuning-free setup and operation

Real-time Load Observer tuning technology automatically tunes each axis, compensates for unknown mechanical structures, and adjusts for applications with changing inertia during operation

Virtual torque sensing helps detect anomalies and provides analysis

Reduces resonance through adaptive tuning using multiple tracking trap filters

About the 2198-S160-ERS3

The 2198-S160-ERS3 Kinetix 5700 Single-Axis Inverter Module is a single-axis inverter used by Allen-Bradley in many integrated motion control applications.

The inverter has a 400 Hz/100 Hz loop bandwidth, a 4 KHz control (PWM) frequency, and an output power supply of 85 ARMS.

120.2 A (0-pk) and a maximum of 160 ARMs, 226.2 A (0-pk).

The 2198-S160-ERS3 has a three-phase power output of 60.1 KW, an internal capacitance of 1120 μF, and requires 92.3 A DC input current at 458-747 V DC.

When the servomotor connected to the inverter does not have a holding option, the inverter has a control current of 4.6A at 24V DC supply.

The inverter also has a control current of 9.6A at 24V DC if the servomotor www.ge-drive.com has braking enabled,.

And the inverter will receive 4A inrush current under 24V DC.

The 2198-S160-ERS3 has an operating heat sink relative to the percentage of rated output power of the inverter of

270W at 20%, 420W at 40%, 570W at 60%, 760W at 80%, and 950W at 100% of utilized output power.

Motor feedback and auxiliary feedback are provided via a 15-pin universal feedback connector (UFB) and a 2-pin motor feedback connector (MF).

and is pre-installed with an EtherNet network connection port.

The 2198-S160-ERS3 has an operating temperature range of 0-50°C (32-122°F), a non-condensing relative humidity of 5-95%, and a storage range of -40-70°C (-40-158°F).

It has a mounting height of 1500 meters (4921 feet), is not rated, and can withstand 15G operational shock and 2G vibration from 55-500Hz.

It is c-UL, CE, KC, c-TICK, ODVA, and OSHA certified and has an IP20 protected enclosure.

The 2198-S160-ERS3 weighs approximately 6.8Kg (15 lbs) and measures approximately 252mm x 478mm x 100mm (9.92″ x 18.82″ x 3.94″).

Our Kinetix® 5700 servo drives are designed for machines with large axes and high power requirements.

These high-performance servo drives utilize leading-edge technology designed to help you build machines that are more capable, more flexible, and more energy efficient than ever before.

The Kinetix 5700 servo drives utilize EtherNet/IP communication technology that

Complete your Logix control system with fast access to the data you need, while simplifying your www.ge-drive.com system by using one network to integrate motion and safety functions.

New Features

Tuning-Free Startup and Operation

The Kinetix 5700 server’s V13 firmware has updated features that reduce or eliminate debugging efforts.

Enhancements include.

Virtual Torque Sensor feature detects anomalies and provides analysis

Adaptive tuning now includes multiple tracking trap filters and improved filter configurations.

Command trap filters reduce load oscillation in applications without load sensors

Supports 200V and 400V rated motors

OVERVIEW

High-performance Kinetix 5700 servo drives help meet the demands of demanding applications in a wide range of industries.

These multi-axis servo drives combine high-performance servo and vector motor control to help simplify machine design and reduce the time and labor costs required for integration.

Kinetix 5700 servo drives can be configured with integrated drive safety and regenerative bus power to help make your next servo solution safer and more energy efficient than ever.

Functional Features

Kinetix 5700 Servo Drive

Delivers high power density in a compact rack size

Offers a wide power range of 1.6…. .112 kW wide power range

Supports servo and induction motors with a wide range of feedback types

Features a dual-axis module

Innovative snap-in bus system for easy assembly and installation

Supports single-cable solutions for motor power and feedback

Includes dual Ethernet ports to support linear and device level ring (DLR) topologies

CIP security features support defense-in-depth approach to network security

Kinetix 5700 Integrated Safety Servo Drive

Includes integrated or hard-wired safety options

Integrated safety option reduces overall system wiring

Advanced safety features with Safe Torque Off, Safe Stop and Safe Monitor functions

Kinetix 5700 Regenerative Bus Power

Helps reduce overall energy consumption by regenerating excess energy

Performs common DC bus voltage regulation over the entire AC input voltage range

On-board diagnostics for power quality monitoring provide real-time analysis via EtherNet/IP

Integrated LC filter reduces installation costs and cabinet space

Tuning-free setup and operation

Real-time Load Observer tuning technology automatically tunes each axis, compensates for unknown mechanical structures, and adjusts for applications with changing inertia during operation

Virtual torque sensing helps detect anomalies and provides analysis

Reduces resonance through adaptive tuning using multiple tracking trap filters

About the 2198-S160-ERS3

The 2198-S160-ERS3 Kinetix 5700 Single-Axis Inverter Module is www.ge-drive.com a single-axis inverter used by Allen-Bradley in many integrated motion control applications.

The inverter has a 400 Hz/100 Hz loop bandwidth, a 4 KHz control (PWM) frequency, and an output power supply of 85 ARMS.

120.2 A (0-pk) and a maximum of 160 ARMs, 226.2 A (0-pk).

The 2198-S160-ERS3 has a three-phase power output of 60.1 KW, an internal capacitance of 1120 μF, and requires 92.3 A DC input current at 458-747 V DC.

When the servomotor connected to the inverter does not have a holding option, the inverter has a control current of 4.6A at 24V DC supply.

The inverter also has a control current of 9.6A at 24V DC if the servomotor has braking enabled,.

And the inverter will receive 4A inrush current under 24V DC.

The 2198-S160-ERS3 has an operating heat sink relative to the percentage of rated output power of the inverter of

270W at 20%, 420W at 40%, 570W at 60%, 760W at 80%, and 950W at 100% of utilized output power.

Motor feedback and auxiliary feedback are provided via a 15-pin universal feedback connector (UFB) and a 2-pin motor feedback connector (MF).

and is pre-installed with an EtherNet network connection port.

The 2198-S160-ERS3 has an operating temperature range of 0-50°C (32-122°F), a non-condensing relative humidity of 5-95%, and a storage range of -40-70°C (-40-158°F).

It has a mounting height of 1500 meters (4921 feet), is not rated, and can withstand 15G operational shock and 2G vibration from 55-500Hz.

It is c-UL, CE, KC, c-TICK, ODVA, and OSHA certified and has an IP20 protected enclosure.

The 2198-S160-ERS3 weighs approximately 6.8Kg (15 lbs) and measures approximately 252mm x 478mm x 100mm (9.92″ x 18.82″ x 3.94″).

The 1756-IF4FXOF2F is a ControlLogix discrete high-speed analog I/O module.

It has four (4) high speed, sub-millisecond, differential inputs and is compatible with input signals ranging from ± 10V 0…. .10V 0… .5V 0… .20 mA.

It also has two high-speed voltage or current outputs with an output signal range of ± 10V 0…. .20 mA.

About the 1756-IF4FXOF2F

The Allen-Bradley 1756-IF4FXOF2F is an analog combo I/O module.

The module is part of the ControlLogix system and is compatible with the 1756 ControlLogix chassis, which requires the 1756-TBS6H or 1756-TBCH removable terminal block enclosure (RTB).

The module has four sub-millisecond high-speed differential inputs and two high-speed voltage or current outputs.

The module has a display that shows the module’s health and operating status (e.g., calibration mode).

The 1756-IF4FXOF2F has input ranges of +/-10 volts, 0 to 10 volts, 0 to 5 volts, and 0 to 20 milliamps, and displays over-range when the module is out of these ranges.

Overvoltage protection is 30 volts DC and 8 volts AC/DC. Its open circuit detection is a positive full scale reading within 1 second.

The module has an output range of +/-10 volts, 0 to 20 milliamps, and short-circuit protection, limiting the electronic current to 21 milliamps or less.

It also has 24-volt DC overvoltage protection and open-circuit detection, but is limited to current outputs only (note that outputs must be set to greater than 0.1 mA).

The 1756-IF4FXOF2F has backplane voltage www.ge-drive.com and current ratings of 375 milliamps (at 5.1 volts DC) and 100 milliamps (at 24 volts DC).

The analog inputs and outputs are rated at -10 to 10 volts and 4 to 20 mA, respectively.

Module power consumption is 4.3 watts with 4.3 watts of voltage dissipation and 4.7 watts of current dissipation.

Thermal dissipation is 14.66 BTU/hr for voltage and 16.02 BTU/hr for current.

Current consumption is 375 mA at 5.1 volts and 100 mA at 24 volts.

It has a scan time update cycle of 300us minutes with sub-millisecond channel scanning and multi-module synchronized sampling.

The Allen-Bradley 1756-IF4FXOF2F is a ControlLogix high-speed analog combo module.

The module features four (4) high-speed, sub-millisecond differential inputs that accept ± 10V, 0 to 10V, 0 to 5V, and 0 to 20 mA signal ranges.

Each analog input channel has integrated over- and under-range indication. It is also equipped with two (2) high speed voltage or current output channels with output ranges of ± 10V and 0 to 20 mA.

The module’s input channels convert received analog signals by successive approximation with 14-bit (±10.5V) and 12-bit (21 mA) conversion resolution.

It has a repeatability of ±1 least significant bit (LSB) and a calibration interval of 12 months.

The analog inputs are suitable for measuring analog process variables such as flow, level, pressure, temperature, viscosity, pH, turbidity, velocity and many other process variables.

The module’s output channels have 13-bit (21 mA = 2.8 µA/bit) and 14-bit (21.8V = 1.3 mV/bit) output resolutions.

The output channels are converted using the R ladder DAC conversion method without missing codes.

The module’s output analog signals can be used to command the modulating operation of control valves, variable frequency drives, dampers, shutters, signal converters, and sensors.

It can also be used to retransmit signals for use with indicators, recorders, and other devices.

The module’s analog output can be connected to manual control commands, arithmetic operations, or the control output of a proportional-integral-derivative (PID) controller.

Technical Description of the 1756-IF4FXOF2F

Allen Bradley ControlLogix high-speed analog input/output module with four sub-millisecond, high-speed differential inputs.