email:abbdrive88@gmail.com
Call us 24/7+86 15396212224
Call us 24/7+86 15396212224

FOXBORO Compact FBM215 HART® Communication Output Interface Module

The compact FBM215 HART® Communications Output Interface Module provides eight output channels, each providing either a 4 to 20mA output signal or a digital HART signal superimposed on an analog output.

Features

The key features of the Compact FBM215 module are listed below:

 Eight isolated output channels, each providing one of the following outputs:

– Standard 4 to 20 mA analog output signals

– Digital HART Frequency Shift Keying (FSK)

Digital HART Frequency Shift Keying (FSK) signals are superimposed on the 4 to 20 mA analog output signals.

 FSK modem dedicated to each output channel for bi-directional digital communication with HART field devices

 Galvanic isolation of all output channels from each other and from ground and module logic

 Supports HART common commands required to interface field devices with the Foxboro Evo™ Control Core Service System.

Database

 Compact, ruggedized enclosure for Class G3 (harsh) environments

 Termination assembly (TA) for local or remote connection of field wiring to the compact FBM215.

OVERVIEW

The Compact HART Communication Output Interface Module (FBM215) contains eight channels of isolated output channels.

The Compact FBM215 supports any combination of standard 4 to 20 mA devices and HART devices, and is part of the Compact 200 Series I/O Subsystem, as described in the Compact 200 Series I/O Subsystem Overview.

The Compact FBM215 serves as a host for HART-communicating field devices, allowing the Foxboro Evo system to request and receive two digital telegrams per second from each field device.

The Telegram Pass-Through feature can be used to support HART generic, common, and device-specific commands, but does not support burst communication modes.

These commands are implemented through the Intelligent Field Device Configurator (IFDC – see Intelligent Field Device Configurator FoxCom for details) and the HART protocol.

The compact FBM215 provides an isolated power supply for each channel.

When connected to the appropriate TA, the Compact FBM215 provides the functionality previously provided by the 100 Series FBM I/O subsystem.

TAs support the functional HART devices of the 100 Series FBM37 when the FBM37 is used with the following devices

Compact Design

The compact FBM215 has a narrower design than the standard 200 series FBM.

It has a rugged acrylonitrile-butadiene-styrene (ABS) housing that provides physical protection for the circuitry.

Enclosures specifically designed for mounting the FBM www.ge-drive.com provide varying degrees of environmental protection up to the harsh environments specified in ISA Standard S71.04.

Visual Indicators

Light emitting diodes (LEDs) on the front of the module provide a visual indication of the module’s operational status and channel communication activity.

Easy Removal/Replacement

Modules are mounted on a Compact 200 Series base plate that can be mounted either on DIN rails or horizontally in a rack using a kit.

Includes signal connectors for redundant fieldbus, redundant independent DC power supply and termination cables.

Two screws on the FBM secure the module to the Compact 200 Series base plate.

Removing/replacing the module eliminates the need to remove field device termination cables, power supplies, or communication cables.

Termination Components

Field output signals are connected to the FBM subsystem via DIN rail mounted TAs.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

ILX56-MM Message Manager for Industrial Communications

5X00419G01 Ethernet Link Controller

1769-PB4 Power Module

IC660TBD025 GeniusI/O Terminal Assembly Module

BSFC-01C Charge Controller Board SP Kit Gate Driver Boards

BSFC-02C Charge Controller Universal Brake Chopper

DS200DSPCH1ADA Word Signal Processor Control Board

1769-OF2 Analog Output Module

CA5-01 Auxiliary Contacts Front Mounting Block Screw Clip

FOXBORO 130M Series Pnuematic Controller

The 130M Series Pnuematic controllers offer manual setpoint adjustment and are the standard controller in the Foxboro® 130 Series.

All Foxboro® 130 Series controllers are designed for high-density control room installations.

These devices are ideally suited for applications where precise control is critical to skilled process management.

The 130M Series is essentially the same as the 130P and 130F Series with the exception of the following features:

130P Series: Has setpoints that are pneumatically modified by remote signals.

130F Series: Remote/local switching to support manual or pneumatic modification of setpoints.

Designed for high-density control room installations, these controllers are suitable for any situation where precise control is required for efficient process management.

The basic controller is the 130M series with manual setpoint adjustment. 130P series is similar to the 130M, but the setpoint can be adjusted pneumatically via a remote signal.

The 130F series is similar to the 130M but includes a remote/local switch for manual or pneumatic setpoint adjustment.

Large Eye-Catching Display

The visibility and legibility of the large, brightly colored pointer located directly behind the clear vertical scale has become the benchmark against which other display concepts are judged.

The system provides a continuous full-scale display of all variables, an effective indication of controller deviations, and easy scale changes without tools.

Separate automatic and manual control units

Both the automatic and manual control units can be disassembled without disrupting the process.

This design feature avoids costly downtime for servicing the controller.

Completely Unbalanced and Bufferless Transmission

The 130 Series controllers utilize the “integral balancing” method for bufferless transfer. After transfer, the controller simply responds at the integral (reset) rate that

This eliminates any error between setpoint and measurement. In www.ge-drive.com addition to providing easy, unbalanced and unbuffered transmission, this solution preserves the setpoint.

Simple and cost-effective installation

Up to 10 instruments can be accommodated in a multi-unit rack. All air connections are made when the controller is installed in the rack.

Piping costs are minimized as each rack has its own integrated air supply header and individual air shutoff valve.

Easy Maintenance

The 130 Series utilizes a unique pneumatic circuit board that greatly enhances the sophistication of the pneumatic control system. This board eliminates many of the piping and connections found in other controllers.

All components are located on one side of the board and are easily accessible by sliding back the cover on one side.

Force Balance Control Module

The proven force balance control module ensures long service life and reliability. Due to the use of metal bellows, there is virtually no movement in the flexure suspension mechanism, thus providing the user with a clearly superior controller.

Specialized Controllers for Every Application

Foxboro offers the industry’s widest range of optional accessories and specialized control features. In addition to normal control modes, these include single-station ratios, single-station computer setups, auto selectors, differential gaps, and “batch” processing.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

CA5-10 1-Pole Front Auxiliary Contact Block with Screw Terminals

IC660TBD025 GeniusI/O Terminal Assembly Module

1769-OF2 Analog Output Module

1769-PB4 Power Supply Module

80190-780-01-R HMI Interface Board Printed Circuit Boards

BSFC-01C Charge Control Board SP Kit Gate Driver Boards

MPL-B580F-MJ72AA Servo Motor

SK-G9-GDB1-D292 Medium and High Voltage Inverter Heat Sink Fan Main Board

DS200LDCCH1AGA Drive Control/LAN Communication Board

CA5-01 Auxiliary Contacts Front Mounting Block Screw Clip

Foxboro FBM204 Interface Module

OVERVIEW

The FBM204.0 to 20 mA Input/Output consists of four 20 mA dc analog input channels and four 20 mA dc analog output channels.

Each input channel accepts an analog sensor input or a self-powered 20 mA supply.

Each output channel drives an external load to produce a 0 to 20 mA output.

The inputs/outputs are electrically isolated from other inputs/outputs on channel and ground.

The FBM204 performs the signal conversion required for electrical input interfaces/output signals from field sensors to an optional redundant fieldbus.

The FBM204 performs analog I/O applications that provide configurable options for the following functions: conversion time,

Fail Safe Configuration (Hold/Return) and Analog Output Fail Safe Return Data (on a per channel basis).

The Fieldbus Module (FBM) can alternatively perform the fast control loops in which www.ge-drive.com Distributed PIDA (DPIDA) applications provide operation.

The FBM204 is electrically compatible with standard HART signals.

Features

-Four 20 mA dc analog input channels

-Four 20 mA dc analog output channels

-Each input and output channel is galvanically isolated

-Ruggedized design for use in Class G3 (harsh) environment enclosures

-Performs analog I/O applications with configurable options for conversion time and change rate limits

-High accuracy through sigma-delta data conversion per channel

-Terminal assembly (TA) for local or remote connection of field wiring to the compact FBM204

-TA for output bypass station to maintain output operation during maintenance

3-tier terminal assembly power transmitter with internal and/or external loops for each channel

-Supports DPIDA control block with high accuracy

For high accuracy, the module provides new analog input readings every 25ms depending on the channel basis, as well as configurable integration cycles to eliminate any process and/or noise and power line

Frequency. the FBM converts each analog input to a digital value at each time period, averages these values over a period of time, and provides the average value to the controller.

Standard Design

The FBM204 has a rugged extruded aluminum housing circuit. The enclosure specifically designed for mounting the FBM is available in a variety of grades according to ISA standard S71.04. environmental protection in harsh environments.

The front of the Visual Indicator Module contains red and green light emitting diodes (LEDs) to provide visual status indication of FBM function.

Easy Removal/Replacement

The module is mounted to the Compact 200 Series baseplate. two screws on the FBM mounts attach the module to the baseplate. The module can be removed/replaced without disassembly for field device termination wiring or power or communications wiring.

Fieldbus Communication

The fieldbus communication module or control processor uses a redundant 2Mbps modular fieldbus with the FBM.The FBM accepts communication from either path (A or B) of the 2Mbps fieldbus. If a path is

unsuccessful or switched at the system level, the module continues to communicate on the active path.

Modular Baseboard Mounting

Modules are mounted on DIN-rail mounted modular baseplates* for up to four to eight FBMs. modular baseplates are DIN-rail or rack-mountable and include signal connectors for redundant fieldbuses, redundant independent DC power supplies, and termination cables.

Related Product Recommendations:

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF2 Analog Output Module

IC200ALG260 Analog Input Module Analog Input Module

CE3008 KJ2005X1-MQ1 12P6381X022 Unit Module

CE30089 Controller Module

MMS6120 Dual Channel Bearing Vibration Measurement Module

MMS6210 Machine Health Monitor

VMIVME-3122 CPU Motherboards

1C31132G01 Analog Output Card

VMIVME-4116 8-channel 16-bit resolution analog output board

MMS6110 Machine Monitoring System Signal Converter

D1961SH45T Rectifier Diode Industrial Robot Parts and Accessories

IC200ALG327H 12-Channel 13-Bit Voltage Analog Output Module

Search for products

Back to Top
Product has been added to your cart