Category: Honeywell

GENERAL

The Yamatake Honeywell EC7895A and RM7895 is a microprocessor based integrated burner control for automatically fired gas, oil, or combination fuel single burner applications. The RM7895 consists of the Relay Module. Subbase, Amplifier and Purge Card. Options include Keyboard Display Module, Personal Computer Interface, DATA CONTROLBUS MODULE™, Remote Display Module, and COMBUSTION SYSTEM MANAGER™ Software.

The EC7895 and RM7895 are programmed to provide a level of safety, functional capability and features beyond the capacity of conventional controls.

Functions provided by the EC7895 and RM7895 include automatic burner sequencing, www.ge-drive.com flame supervision, system status indication,system or self-diagnostics and troubleshooting.

FEATURES

• Safety features:

— Airflow switch check.

— Closed loop logic test.

— Dynamic AMPLI-CHECK®.

— Dynamic input check.

— Dynamic safety relay test.

— Dynamic self-check logic.

— Internal hardware status monitoring.

—Tamper resistant timing and logic.

• Access for external electrical voltage checks.

• Application flexibility.

• Communication interface capability.

• Dependable, long-term operation provided by microcomputer technology.

• First-out annunciation and system diagnostics provided by a 2 row by 20 column Vacuum Fluorescent Display (VFD) located on the optional Keyboard Display Module.

• Five (LEDs) for sequence information.

• Interchangeable plug-in flame amplifiers.

• Local or remote annunciation of EC7895 and RM7895 operation and fault information.

• Nonvolatile memory; EC7895 and RM7895 retain history files and sequencing status after loss of power.

• Remote reset (optional).

• Report generation (optional).

• Selectable recycle or lockout on loss of airflow.

• Selectable recycle or lockout on loss of flame.

• Shutter drive output.

• Burner controller data (optional):

— Flame signal strength.

— Hold status.

— Lockout/alarm status.

— Sequence status.

— Sequence time.

—Total cycles of operation.

—Total hours of operation.

—Fault history providing for the six most recent faults:

• Cycles of operation at the time of the fault.

• Fault message and code.

• Hours of operation at the time of the fault.

• Sequence status at the time of the fault.

• Sequence time at the time of the fault.

— Diagnostic information:

• Device type.

• Flame amplifier type.

• Flame failure response time.

• Manufacturing code.

• On/Off status of all digital inputs and outputs.

• Selected prepurge time.

• Software revision and version of EC7895 and RM7895 and optional Keyboard Display Module.

• Status of configuration jumpers.

GENERAL

The Honeywell EC/RM7830. EC/RM7850 Relay Module is a microprocessor-based integrated burner control for automatically fired gas, oil, or combination fuel burner on/off (EC/RM7830A) or full modulation (EC/RM7850A) power burner applications. The EC/RM7830A or EC/RM7850A system consists of the relay module, wiring subbase, amplifier and purge card. Options include the keyboard display module (KDM), personal computer interface, Data ControlBus™ Module, and Combustion System Manager® Software. The KDM can be mounted on the relay module or on the face of a panel door. The KDM can also be remotely mounted from the panel if this is approved for the application.

The EC/RM7830. EC/RM7850 is programmed to provide a level of safety, functional capability and features beyond the capacity of conventional controls.

The basic functions of the EC/RM7830A, EC/RM7850A includes automatic burner sequencing, flame supervision, www.ge-drive.com system status indication, system or self-diagnostics, and troubleshooting.

FEATURES

• Safety Features:

— Interlock check.

— Dynamic Ampli-Check™.

— Closed loop logic test.

— Dynamic input check.

— Dynamic safety relay test.

— Dynamic self-check logic.

— High Fire Purge Switch test (EC/RM7850A).

— Expanded safe-start check.

— Internal hardware status monitoring.

— Low Fire Start Switch test (EC/RM7850A).

— Tamper-resistant timing and logic.

• Ignition attempts: 1 or 5. Selectable by model number.

• Access for external electrical voltage checks.

• Application flexibility.

• Microcomputer technology allows dependable, long-term operation.

• First-out annunciation and system diagnostics provided by a 2-row by 20-column vacuum fluorescent display (VFD) located on the KDM (optional). Text readout available in English, Spanish, Portuguese, French, German, Japanese (Katakana), Chinese, and Italian languages.

• Five sequence information light emitting diodes (LEDs) with symbols for Power, Pilot, Flame, Main, and Alarm (see Fig. 1).

• Five-function Run/Test Switch.

• Interchangeable plug-in flame amplifiers.

• Non volatile memory; EC/RM7830A, EC/RM7850A retain history files and sequencing status after the loss of power.

• Remote reset (subject to application approval; optional).

• Remote mounting of KDM (subject to application approval).

• Burner control data available on the optional KDM:

— Flame signal strength.

— Hold status.

— Lockout/alarm status.

— Sequence status.

— Sequence time.

— Total cycles of operation.

— Total hours of operation.

— Fault history providing the six most recent faults:

• Cycles of operation at the time of the fault.

• Fault message and code.

• Hours of operation at the time of the fault.

• Sequence status at the time of the fault.

• Sequence time at the time of the fault.

— Diagnostic information:

• Device type.

• Flame amplifier type.

• Flame failure response time (FFRT).

• Manufacturing code.

• On/off status of all digital inputs and outputs.

• Selected prepurge time.

• Software revision and version of relay module and optional KDM.

• Status of configuration jumper.

• Status of Run/Test Switch.

Honeywell Honeywell OEP Control Keypad 51402497-200 is part of Honeywell’s Distributed Control System (DCS).

used in industrial automation. This keypad has a variety of functions and features that provide operators with the ability to control and monitor industrial processes.

Features of the Honeywell Honeywell OEP Control Keypad 51402497-200 include:

DURABILITY: This keypad is manufactured using high-quality materials and components for high durability and stability, allowing it to operate stably for long periods of time in harsh industrial environments.

Ease of Programming and Maintenance: The keypad features an easy-to-use programming language and graphical interface for engineers to program and maintain.

Meanwhile, the keyboard also has a remote programming and maintenance function, which makes it easy to carry out remote debugging and maintenance.

Multiple Input/Output Interfaces: The keypad has multiple input/output interfaces, which can be connected to a variety of sensors and actuators to realize reliable communication with industrial equipment.

Strong compatibility: The keypad can be integrated with various Honeywell DCS systems and other industrial automation equipment to realize more complex control and monitoring tasks.

In conclusion, Honeywell Honeywell OEP Control Keyboard 51402497-200 is reliable in industrial automation,

stable operating equipment, widely used in the control and monitoring of various industrial processes and equipment.

Honeywell DCS system includes several models, the following are some common models:

Alcont: Alcont is one of Honeywell’s DCS systems designed for controlling, measuring, monitoring and integrating industrial businesses and manufacturing plants.

Each generation of Alcont can be easily integrated with Experion technology.

ExperionLS: ExperionLS provides reliable, flexible and easy-to-operate distributed control systems (DCS) for small and medium-sized manufacturing companies.

ExperionPKS: ExperionPKS is Honeywell’s high-performance DCS system designed for demanding industrial applications for large, complex process installations.

PlantScape: PlantScape is Honeywell’s next-generation process control system designed to provide a single-tier solution for large and medium-sized industrial facilities.

TDC3000: TDC3000 is Honeywell’s early DCS system with mature technology and stable performance.

TPS: TPS is a high-performance DCS system from Honeywell for demanding control and monitoring tasks in a variety of industrial areas.

Honeywell DCS system has the following characteristics:

High reliability: Honeywell DCS system adopts a decentralized control structure, which disperses system control functions over multiple computers.

Fault-tolerant design ensures that computer failure will not result in the loss of other system functions.

In addition, each computer in the system undertakes a task and uses a dedicated computer with a specific structure and software to realize the functions to be realized.

This increases the reliability of each computer in the system.

Openness: The Honeywell DCS system adopts an open, standardized, modularized and serialized design.

Each computer adopts LAN communication to realize information transmission. www.ge-drive.com When system functions need to be changed or expanded, the

When system functions need to be changed or expanded, newly added computers can be easily connected to or removed from the system communication network, with little or no impact on the work of other computers in the system.

Flexibility: Honeywell DCS systems can be configured with hardware and software based on different process applications.

Determine the measurement and control signals and the connection relationship between them, select the applicable control algorithm from the control algorithm library, the

And call the basic graphics from the graphics library to form a variety of monitoring and alarm images to facilitate the formation of the required control system.

Easy Maintenance: Honeywell DCS systems are characterized by simple and convenient maintenance of small or miniature dedicated computers with a single function.

When a component or computer fails, it can be replaced online without affecting the operation of the entire system in order to quickly clear the fault.

Coordination: Honeywell DCS systems transmit a variety of data between workstations via a communications network and share and coordinate information across the entire system to accomplish the overall function and optimization of the control system.

Complete control functions: Honeywell DCS system has rich control algorithms, integrating continuous control, sequence control and batch control.

It can realize control functions such as serial, feed-forward, decoupling, adaptive and predictive control, etc., and can easily add the required special control algorithms.

Powerful computing capability: Honeywell DCS system adopts high-performance microcomputer processing capability, which can not only realize the control of complex regulating circuits, but also realize the rapid control of switching quantities.

Rich communication interfaces: Honeywell DCS system has a variety of communication interfaces, such as serial communication, Ethernet communication and Profibus communication.

It can exchange data and work together with other industrial automation equipment.

Powerful expansion capability: Honeywell DCS systems can be integrated with other intelligent devices to realize more complex control and monitoring tasks.

In short, Honeywell DCS system is characterized by high reliability, openness, flexibility, easy maintenance, coordination, and complete control functions.

It can provide reliable, stable and efficient control and monitoring solutions for industrial automation.

The Honeywell 51403165-400 Keypad Tray Assembly is a keypad assembly designed for Honeywell DCS systems.

It offers high quality and stability. This keypad tray assembly has a variety of features and functions that provide operators with the ability to control and monitor industrial processes.

Features and functionality of the Honeywell 51403165-400 keypad tray assembly include:

High reliability: manufactured with high-quality materials and components for high durability and stability for long, stable operation in harsh industrial environments.

High compatibility: Designed for Honeywell DCS systems, it can be integrated with other Honeywell DCS systems and other industrial automation equipment for more complex control and monitoring tasks.

Easy to program and maintain: Features an easy-to-use programming language and graphical interface for engineers to program and maintain.

Meanwhile, it also has the function of remote programming and maintenance, which makes it easy to carry out remote debugging and maintenance.

Multiple input/output interfaces: With multiple input/output interfaces, it can connect various sensors and actuators to realize reliable communication with industrial equipment.

Ergonomic design: Ergonomic design provides a comfortable keyboard www.ge-drive.com operating experience and reduces operator fatigue.

In conclusion, Honeywell 51403165-400 keyboard tray assembly is one of the reliable and stable operating devices in the field of industrial automation.

It is widely used in the control and monitoring of various industrial processes and equipment.

Honeywell 51403165-400 Keypad Tray Assembly is a high quality, stable and reliable industrial automation equipment designed for Honeywell DCS system.

In addition to the features mentioned above, this keypad tray assembly offers the following advantages:

Quick integration: The keypad tray assembly integrates seamlessly with Honeywell DCS systems, simplifying installation and configuration and improving integration efficiency.

Easy to Operate: The keyboard tray assembly features an intuitive interface and simple key layout for quick operator familiarization and operation, improving work efficiency.

Flexible Configuration: The keyboard tray assembly can be customized according to actual needs, including key functions, interface types, etc., to meet the control needs of different industrial processes and equipment.

Good expandability: This keyboard tray assembly has good expandability and can be connected with other intelligent devices and sensors to realize more complex control and monitoring tasks.

Comprehensive after-sales service: Honeywell provides comprehensive after-sales service and technical support to ensure that the keypad tray assembly always maintains optimal performance over a long period of time.

In a word, Honeywell 51403165-400 keypad tray assembly is one of the indispensable control devices in the field of industrial automation, which has a wide range of application prospects and market demand.

Honeywell DCS system has the following characteristics:

High reliability: Honeywell DCS system adopts a decentralized control structure, which disperses system control functions over multiple computers.

Fault-tolerant design ensures that computer failure will not result in the loss of other system functions.

In addition, each computer in the system undertakes a task and uses a dedicated computer with a specific structure and software to realize the functions to be realized.

This increases the reliability of each computer in the system.

Openness: The Honeywell DCS system adopts an open, standardized, modularized and serialized design.

Each computer adopts LAN communication to realize information transmission. When system functions need to be changed or expanded, the

When system functions need to be changed or expanded, newly added computers can be easily connected to or removed from the system communication network, with little or no impact on the work of other computers in the system.

Flexibility: Honeywell DCS systems can be configured with hardware and software based on different process applications.

Determine the measurement and control signals and the connection relationship between them, select the applicable control algorithm from the control algorithm library, the

And call the basic graphics from the graphics library to form a variety of monitoring and alarm images to facilitate the formation of the required control system.

Easy Maintenance: Honeywell DCS systems are characterized by simple and convenient maintenance of small or miniature dedicated computers with a single function.

When a component or computer fails, it can be replaced online without affecting the operation of the entire system in order to quickly clear the fault.

Coordination: Honeywell DCS systems transmit a variety of data between workstations via a communications network and share and coordinate information across the entire system to accomplish the overall function and optimization of the control system.

Complete control functions: Honeywell DCS system has rich control algorithms, integrating continuous control, sequence control and batch control.

It can realize control functions such as serial, feed-forward, decoupling, adaptive and predictive control, etc., and can easily add the required special control algorithms.

Powerful computing capability: Honeywell DCS system adopts high-performance microcomputer processing capability.

It can not only realize the control of complex regulating circuits, but also the rapid control of switching quantities.

Rich communication interfaces: Honeywell DCS system has a variety of communication interfaces, such as serial communication, Ethernet communication and Profibus communication.

It can exchange data and work together with other industrial automation equipment.

Powerful expansion capability: Honeywell DCS systems can be integrated with other intelligent devices to realize more complex control and monitoring tasks.

In short, Honeywell DCS system is characterized by high reliability, openness, flexibility, easy maintenance, coordination, and complete control functions.

It can provide reliable, stable and efficient control and monitoring solutions for industrial automation.

OVERVIEW

The Honeywell ControlEdge HC900 controller is an advanced loop and logic controller with a modular design that meets the control and data management needs of a wide range of process equipment. Combined with the optional 900 Control Station Operator Interface, which is highly integrated with the controller database, configuration and setup time can be minimised. This powerful combination, combined with Honeywell’s proven control technology, provides users with an ideal process control solution. An open Ethernet connection using Modbus TCP protocol also allows network access using a variety of HMI/SCADA software. An independent watchdog timer protects the programme execution environment.

Easy-to-use Windows-based Designer software, which operates over Ethernet or RS485 ports (isolated), simplifies controller configuration. The software is available in English, Chinese, Russian and German. It provides advanced monitoring capabilities for debugging, allows process configuration changes in www.ge-drive.com run mode while maintaining process control, uploads complete graphical controller configurations with comments, and provides a range of reports for enhanced documentation. controlEdge HC900 controllers offer better PID cycling and more powerful analogue processing than most logic controllers without compromising logic performance. powerful analogue processing without compromising logic performance. Individual fast scanning

cycle performs a rich set of logic and calculation function blocks. Logic function blocks can also be executed in the same scan cycle as analogue function blocks to handle time critical events.

These function blocks can be fully integrated into combined analogue and logic control strategies for unrivalled control performance.

Applications

Mining and metals Furnaces, kilns, boilers

Chemicals, extruders Autoclaves

Pharmaceutical sterilisers, dryers

Railway/ Infrastructure Burner Mgmt,

HVAC/ data centres Combustion control

Pulp & Paper Emergency Shutdown

Cement and glass Pipeline monitoring

Power Leak Prevention

Functional Overview

– Supports split-rack redundancy

– Supports Honeywell FDM (Field Device Manager) with HART IP

– Supports HART function blocks (Commands 3 and 48)

Note: HART support requires a UIO module

– Non-redundant and redundant architectures

– Sequence of Events Support (SOE)

Note: Supported only in non-redundant UIO configurations.

– Redundant and Non-Redundant Safe General Purpose IOs

– PID control with advanced Accutune III auto-tuning

– Secure peer-to-peer communication between ControlEdge HC900 controllers

– External watchdog timer with independent clock to detect unexpected CPU lockups

– Adjustable recipe pool memory allocates memory for recipes, SP profiles, sequences, and schedules to meet your needs

– Up to 4608 points can be connected via remote I/O

– Boolean logic programming. powerful combination of over 100 algorithms

– Advanced floating-point maths functions.

– Extensive alarm and event monitoring

– Up to 2304 galvanically isolated analogue input points

– Up to 1008 redundant UIO points

– New I/O voting and output verification function blocks.

– Remote I/O racks with wires for extended distances.

– Star or ring topology on the IO network using recommended switches

– Scanners and I/O plugged in and out while powered

– LED on/off indicators on digital I/Os

– Graphical Function Block Configuration

– Open 10MB or 10/100MB Ethernet interface using Modbus/TCP. Point-to-point communication via Ethernet

– Priority email alarm/event messages

– Ramp/soak setpoint programmer

– Setpoint scheduler with multiple outputs

– Sequencer with 16 outputs each

– Modbus read/write parameters can be assigned to fixed or custom addresses for HMI or monitoring software access.

– Modbus TCP Initiator

– Gas flow function block compliant with American Gas Association specifications. (Non-safety configurations only).

– Calendar module for triggering events

– Non-intrusive process/safety worksheets to handle both process and safety configurations.

– Built-in version control

– Quick update – 10 ms digital update and UIO (900U02-xxxx) 100 ms analogue update

Note: Low level AI update time is 0.5 seconds.

Product Overview

The UDC1200 and UDC1700 are microprocessor-based 1/16 DIN and 1/8 DIN controllers that offer high functionality, high reliability and low cost.

They are designed to monitor and control temperature, pressure and level in a variety of applications such as environmental chambers, furnaces, ovens, packaging machines and other applications in the plastics, food and beverage industries.

other applications in the industry.The UDC1200 and UDC1700 are easy to configure and use with large, easy-to-read dual 4-digit displays and touch-sensitive keypads.

Their outstanding flexibility allows you to configure any unit for any application and make changes when needed.

For the thousands of satisfied UDC1000/1500 users, the UDC1200/1700 controllers are backward compatible with existing UDC1000/1500 applications and installations.

Functional Features

Dual Displays

Two 4-digit displays with 7 LED segments, each configurable as

 PV and SP (non-adjustable)

 PV and SP (adjustable)

 PV and ramp SP

 PV only

Easier Configuration

Two different configuration levels (Configuration Mode and Setup Mode) provide easy access to parameters.

4-digit security code prevents unauthorised changes.

Positive Moisture Protection

Meets NEMA 3 / IP65 standards for frontal dust and water resistance.

Universal Inputs

Accepts seven different types of thermocouple, RTD, current and voltage linear inputs. All inputs can be configured as standard.

Universal Power Supplies

The UDC1200 and UDC1700 can operate on any line voltage from 50/60 Hz, 90 Vac to 264 Vac. Optional 24/48 Vac/dc models are also available.

Easy Upgrade

All option boards have no jumpers and are automatically detected by the instrument.

Easy Output Selection

All of the instrument’s outputs, including the control output, can be changed to www.ge-drive.com meet the customer’s exact needs.

Alarm strategies

Two PV soft alarms, deviation high/low/absolute. A special loop alarm is also available, by continuously analysing the PV

response to the control output. Alarm suppression is available for both power-up and setpoint switching.

Manual/Auto Mode

Manual control can be enabled (via unbuffered transfer) by simply pressing the AUTO/MAN key on the front.

The “SETUP” LED flashes and the output power is shown on the lower display. The output power can be adjusted with the up and down keys.

Pre-Tuning and Self-Tuning Strategies

Pre-tuning is used to set the PID parameters to near optimum values, which are then used by the self-tuning algorithm to optimise the tuning parameters.

Limit Controller

The UDC1200 Limit Controller is available in a 1/16 DIN package and provides a safety shutdown function and optional alarms for a variety of applications.

Up to three outputs

The UDC1200 and UDC1700 provide up to three outputs for time and current proportioning, duplex mode (heating/cooling), PV or SP retransmission and alarms.

Setpoint Ramping

The current setpoint can be ramped to a new target setpoint with a user-defined slope.

Dual Setpoints

The UDC1200 and UDC1700 offer a dual setpoint option. The current setpoint is selected by a digital input. This option is independent of the UDC1200 limit mode remote alarm reset function.

Communication

The UDC1200 and UDC1700 are available with an optional RS485 communications interface. It provides connectivity for up to 32 devices and host computers at speeds up to 19200 baud via ASCII or Modbus RTU protocol.

For the highest inertial navigation-grade performance available in today’s market, Honeywell offers the QA-3000.

In the same form factor as the QA-2000, Honeywell packs a lot of performance and value into this small package.

Produced on the same manufacturing line as the QA-2000, the QA-3000 has the same inherent quality and reliability customers have come to know from Honeywell Q-flex accelerometers.

As with the entire Q-Flex family of accelerometers, the QA-3000 features a patented Q-Flex etched-quartz-flexure seismic system.

An amorphous quartz proof-mass structure provides excellent bias, scale factor and axis alignment repeatability.

The integral electronics develops an acceleration-proportional output current providing both static and dynamic acceleration measurement.

By use of customer supplied output load resistor, appropriately www.ge-drive.com scaled for the acceleration range of  the application, the output current can be converted into a voltage.

The QA-3000 also includes a current-output, internal temperature sensor.

By applying temperature-compensating algorithms, bias, scale factor and axis misalignment performance are dramatically improved.

The QA-3000 has three performance grades to best meet customer’s performance requirements.

FEATURES

• Excellent turn-on repeatability performance

• Form, fit, function compatible with QA-2000, easy to upgrade for the most performance demanding applications

• Remarkably low bias and scale factor repeatability

• Environmentally rugged

• Analog output

• Field-adjustable range

• Three fastener precision mounting flange

• Internal temperature sensor for thermal compensation

• Dual built-in self-test

Introduced in 1975. the basic controller was part of the world’s first commercially available DCS, and Honeywell has been supporting it ever since.

Honeywell helps users migrate to Experion when control system changes are needed and it makes economic sense to replace the existing controller.

During the migration process, two key functions need to be achieved – existing field signals must be easily and quickly migrated to the new control system, the

Existing control schemes must be migrated and, ideally, improved. To meet these two migration requirements, Honeywell offers advanced solutions that

help match the functionality of the old system to Experion.’ Signal Match is a suite of hardware components and project services that

Simply and easily transfer the I/O connections of your existing TDC 2000 control system so you can experience the many benefits of Experion PKS.

‘Control Match is a suite of services and tools to convert your existing control algorithms and schemes to Experion.

Control Match enables you to take advantage of the many new features in Experion to enhance the performance of your control system and improve your ability to make informed business decisions.

Q: What if I need to do more than just maintain what I have?

Answer:Over the past 30 years, Honeywell has made significant www.ge-drive.com investments to ease the strain on technology and add value to the TDC and TPS control systems’

value to the large installed base. Continuous development is Honeywell’s strategy and commitment to stay with customers through technological advances. For example, Honeywell

Honeywell is the only controls company that offers the ability to integrate and, if desired, migrate a 30-year-old control system to the latest state-of-the-art

control system, Experion PKS.

Honeywell offers the ability to integrate or migrate to Experion. With integration, you can retain the intellectual property developed over the past 30 years, and you can

add new features such as Foundation Fieldbus, HART and exception management capabilities. With migration, you can go from the lowest level of control, to the most advanced level of control, to today’s new, higher levels of control.

By migrating, you can go from the lowest level of control to today’s new, higher level of advanced control solutions and gain additional benefits while reducing ongoing maintenance and support costs.

Q: What is Experion PKS?

A: Experion PKS is the first scalable platform with knowledge-driven applications that combine business and manufacturing intelligence.

Operator Effectiveness Solutions – One Honeywell is the only provider of an integrated solution that addresses alarm management,

boundary management and operations management issues to improve operational reliability. Asset Effectiveness Solutions-Honeywell’s approach to asset management goes beyond

just on-site equipment management. We monitor the performance of critical plant assets to reduce process downtime and unplanned maintenance costs.

Q: I have 1-to-8 controller redundancy in my current installed control system. What type of redundancy will I have available when I migrate to Experion?

A: When you migrate to Experion, the redundancy will be increased to 1-to-1. This new level of redundancy greatly increases the availability of the control system.

Q: Will my trend be comparable to the existing BOS/EOS Box Trend?

Answer:Box Trends are limited snapshots of process variables that can only be updated with operator intervention.Experion Trends go well beyond Box Trends and

provides truly useful historical information for the operator to analyse and control the process. All trend data is presented to the operator.

Operators can zoom, pan and select specific trend data in real time. Data points to be trended can also be selected and grouped together for real-time

process analysis.

Q:I need to improve/automate my reports to meet new requirements. Will migrating to Experion help me?

A: In addition to the greater number and type of reports available, a key feature is the ability to electronically transmit reports over the plant network to all interested parties.

to all interested parties via the plant network. You no longer need operators or engineers to manually read printed reports, perform additional calculations, and then create new

reports. In addition, all data can be automatically populated into Excel spreadsheets, automating data manipulation, analysis and distribution.

Q:What kind of new control will I have when I migrate to Experion?

A: Experion offers improved control capabilities such as model-based control, integrated loops, and logic capabilities for improved process discipline control.

Control. Cross-cell control is implemented in easy-to-use software rather than the hard-wiring between controllers that was required in the past.

Q: Can I simply ‘copy’ an existing control scheme to Experion without making any changes?

A: The Control Match service allows for simple copying of controls from an existing system to Experion. all point types and standard algorithms of Basic Controller can be easily migrated.

Q:How fast is the physical migration of a plant/plant site to a new controller?

Answer:Typical time for a physical migration to occur is 2 to 4 hours, and even less for migrating smaller systems. There are two reasons for the short downtime. First

First, the migration kit is a plug-and-play design. Simply disconnect the cables, remove a few screws on each component, install new components, and

connect or reconnect the cables, and you are done with the physical operation. The second reason is that L/O checkout can be quite efficient. All existing

existing L/O and cables were functioning properly prior to migration, and the new cables and assemblies were tested and verified at the factory prior to shipment.

Q: I have limited space available, so do I need additional cabinet space to install the new Experion controller?

A: In most cases, the new control system can be installed into an existing TDC2000 cabinet.

Q:Are there calibration and test points for ongoing maintenance?

A:Yes, calibration and test points are provided.

Q:Are there any active components on the migration kit such as CPU and network?

Answer:numberAll signal matching migration hardware is created using passive components. This greatly increases reliability and longevity and reduces the number of possible failure paths.

Related Product Recommendations:

DS200CVMAG3AEB Generator Control Turbine Boards

5X00070G03 Analogue High Speed Input Module

DS200ACNAG1 Computer Network (ARCNET) Boards

DS200DSPCH1 Processor Control Board

DS200DSPCH1A Digital Signal Processor Control Board

DS200FGPAG1AKD Control Gate Pulse Amplifier Board

5X00785G09 Power supply System

DS200GGDAG1AHE Gas Turbine Gate Driver

DS200CPCAG1ABB Contactor Guide Boards

1C31234G01 Compact Contact Input Module

DeltaV™m VerticalPlus Input/Output Subsystem Carrier

VMIVME-4140-001 VMIVME4140 16-channel 12-bit analogue output board

DS200CPCAG1A Contactor Boot Card

DESCRIPTION

The 91MCE series of limit switches complements Honeywell’s existing line of small, low-cost limit switches.

Designed for the modern industrial OEM, the miniature package size is ideal for applications where space is limited.

For applications requiring more than two switching circuits, the small package allows for in-line mounting.

The 20mm mounting pattern meets most globally recognised mounting standards.

The product line offers users a wide range of options, including a variety of different actuator styles.

Connection options include various lengths of prefabricated cables or M12 connectors, both of which can be exited from the side or bottom.

Design flexibility is further enhanced by the availability of both slow and fast acting circuits.

Direct-acting contacts are designed to open the NC contacts when touched.

The epoxy-sealed, rugged die-cast housing enhances environmental durability.

Competitively priced, the 91MCE is a direct replacement for many products and offers the higher quality products customers have come to expect from Honeywell.

Features

– Direct-acting contacts designed to open NC contacts when touched

– Sealing class IP67; NEMA 1. 4. 12. 13 for outdoor applications

– CE, UKCA, cULus, CCC approvals meet most global certification requirements

– Nine actuator styles provide design flexibility

– Slow-action and fast-action circuit options

– Reserved cable and M12 connector options

– Mechanical life expectancy: 5 million operations

– Side exit (standard) and bottom exit connection options

Side outlet (standard) and bottom outlet connection options

– Mechanical equipment

– Material handling

– Aerial lift trucks

– Forklift trucks

– Off-road and outdoor equipment

ORTFOLIO

The 91MCE series is part of the 14CE, 914CE, NGC, SZLVL-S, SSCE and SL1 series of miniature limit switches.

Honeywell also offers a range of MICRO SWITCH heavy duty limit switches and general purpose limit switches.

Warranty/Remedy

Honeywell warrants products manufactured by it to be free from defects in material and workmanship for the applicable warranty period.

Honeywell’s standard product warranty applies unless otherwise agreed to in writing by Honeywell;

For specific warranty details, refer to your order confirmation or consult your local sales office.

If the warranted product is returned to www.ge-drive.com Honeywell during the warranty period, Honeywell will, at its sole discretion, repair or replace, free of charge, the product that Honeywell deems to be defective.

The foregoing is Buyer’s exclusive remedy and is in lieu of all other warranties, express or implied, including the following warranties

merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special or indirect damages.

Honeywell may provide application assistance in person, through our materials and through Honeywell websites.

and Honeywell websites for application assistance, but it is the sole responsibility of the buyer to determine the suitability of the product for the application.

Specifications are subject to change without notice.

As of this writing, the information we have provided is believed to be accurate and reliable.

However, Honeywell assumes no responsibility for its use.

DESCRIPTION

The 91MCE series of limit switches complements Honeywell’s existing line of small, low-cost limit switches.

Designed for the modern industrial OEM, the miniature package size is ideal for applications where space is limited.

For applications requiring more than two switching circuits, the small package allows for in-line mounting.

The 20mm mounting pattern meets most globally recognised mounting standards.

The product line offers users a wide range of options, including a variety of different actuator styles.

Connection options include various lengths of prefabricated cables or M12 connectors, www.ge-drive.com both of which can be exited from the side or bottom.

Design flexibility is further enhanced by the availability of both slow and fast acting circuits.

Direct-acting contacts are designed to open the NC contacts when touched.

The epoxy-sealed, rugged die-cast housing enhances environmental durability.

Competitively priced, the 91MCE is a direct replacement for many products and offers the higher quality products customers have come to expect from Honeywell.

Features

– Direct-acting contacts designed to open NC contacts when touched

– Sealing class IP67; NEMA 1. 4. 12. 13 for outdoor applications

– CE, UKCA, cULus, CCC approvals meet most global certification requirements

– Nine actuator styles provide design flexibility

– Slow-action and fast-action circuit options

– Reserved cable and M12 connector options

– Mechanical life expectancy: 5 million operations

– Side exit (standard) and bottom exit connection options

Side outlet (standard) and bottom outlet connection options

– Mechanical equipment

– Material handling

– Aerial lift trucks

– Forklift trucks

– Off-road and outdoor equipment

ORTFOLIO

The 91MCE series is part of the 14CE, 914CE, NGC, SZLVL-S, SSCE and SL1 series of miniature limit switches.

Honeywell also offers a range of MICRO SWITCH heavy duty limit switches and general purpose limit switches.

Warranty/Remedy

Honeywell warrants products manufactured by it to be free from defects in material and workmanship for the applicable warranty period.

Honeywell’s standard product warranty applies unless otherwise agreed to in writing by Honeywell;

For specific warranty details, refer to your order confirmation or consult your local sales office.

If the warranted product is returned to Honeywell during the warranty period, Honeywell will, at its sole discretion, repair or replace, free of charge, the product that Honeywell deems to be defective.

The foregoing is Buyer’s exclusive remedy and is in lieu of all other warranties, express or implied, including the following warranties

merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special or indirect damages.

Honeywell may provide application assistance in person, through our materials and through Honeywell websites.

and Honeywell websites for application assistance, but it is the sole responsibility of the buyer to determine the suitability of the product for the application.

Specifications are subject to change without notice.

As of this writing, the information we have provided is believed to be accurate and reliable.

However, Honeywell assumes no responsibility for its use.