Category: Prosoft

MDA Scientific CM4 Gas

Analyzer Main Module

MVI56-MDA4

The MVI56 MDA Scientific CM4 Gas Analyzer Master Module allows Rockwell Automation ControlLogix processors to easily interface with MDA Scientific CM4 gas monitoring hardware as a host.

Features and Benefits

The MVI56-MDA4 module is an input/output module between the CM4 network and the Rockwell Automation backplane.Data transfer from the ControlLogix processor is asynchronous with operation on the CM4 network.

The 5000 words of register space in the module are used to exchange data www.ge-drive.com between the processor and the CM4 network.

General Specifications

– Single slot – 1756 backplane compatible

– Module is considered an input/output module with access to processor memory for data transfer between processor and module

– Ladder logic is used to transfer data between the module and the processor. Example ladder diagram files are included.

– Configuration data from a configuration text file downloaded to the module.

– Local or remote rack

Functional Specifications

Some general specifications include

– Supports storage and transfer of up to 5000 registers. File

– Two CM4 master ports.

– Configurable parameters include

o Baud rate 110 to 115.200

o Parity None, Odd, Even

o Data bits 5 to 8

o Stop bits 1 or 2

o RTS on and off timing 0 to 65535 milliseconds

o Use CTS modem line Yes or No

o Response timeout 0 to 65535 milliseconds

o Number of slaves 1 to 10

o Simplified data structure yes/no

o Protocol version 1 or 2

o Polling delay 0 to 65535 milliseconds.

Ports configured as virtual CM4 masters on the MVI56-MDA4 module will actively issue CM4 commands to other nodes on the CM4 network. Issues CM4 commands to other nodes on the CM4 network. Supports four read and five

Four read commands and five write commands are supported.

The MDA-4 product includes the following standard features Features:

– Two fully configurable serial ports, each capable of supporting CM4 master functions.

– Supports up to 10 CM4 units per serial port, for a total of 10 CM4 units per module, for a total of 10 units per module.

– Supports movement of binary, integer, ASCII, and floating-point data types Floating-point data type

– Memory maps are predefined in the module to facilitate ladder program execution.

– RS-485 connections on each port can be directly connected to the CM4 unit.

– Software Configuration (from processor ladder logic)

o Slave Address: 0 through 31

o Commands: select commands to be executed

– CM4 command codes are supported:

o Read Command

o 0x30 Get System Information

o 0x31 Get device status

o 0x36 Get alarm history

o 0x37 Get current point status

o Write command

o 0x51 Reset fault or alarm

o 0x52 Set key code

o 0x53 Lock keypad

o 0x60 End point lock

o 0x61 Start point lockout

– Returning the ladder processor’s mode of operation

– Return ladder processor error code

ProSoft Technology’s Modbus® TCP/IP to Siemens Industrial Ethernet Gateway allows for

high-speed bi-directional data transfer between Modbus® TCP/IP controllers and Siemens® S7-400. S7-300. S7-200. S7-1200 and S7-1500 PACs.

In addition, the gateway has a number of features, including data prioritisation, that simplify integration, reduce commissioning time and optimise performance.

Functions

 The ProSoft Discovery Service utility allows your PC to view the gateway and edit its default IP address without being on the same subnet.

 Supports up to 20 simultaneous client and server connections to speed communications between devices such as HMIs, SCADA systems, power monitors, and traffic computers.

 In addition to S7 controllers, the Gateway can also be used with Siemens® S5 controllers with corresponding interfaces.

 The Gateway includes an SD card slot (SD card optional) for storing configuration files. It can be used for disaster recovery.

 Safe module configuration via Module Switch (v1.04 and higher).

 can exchange large amounts of data using up to 10.000 16-bit registers.

Specification Description

Power Supply 24 VDC nominal

10 to 36 VDC allowed

Positive, negative, ground terminals

Current Load 24 VDC nominal @ 300 mA

10 to 36 VDC maximum @ 610 mA

Operating Temperature -25°C to 70°C (-13°F to 158°F)

Storage Temperature -40°C to 80°C (-40°F to 176°F)

Shock IEC 60068-2-27; 15G @ 11ms, 3 axes (in operation)

IEC 60068-2-27; 30G @ 18ms, 3 axes (non-operating)

Vibration IEC 60068-2-6; 5G @ 10 to 150 Hz

Relative humidity 5% to 95% RH, non-condensing

Dimensions (H x W x D) 5.38 x 1.99 x 4.38 in.

13.67 x 5.05 x 11.13 cm

LEDs Configuration (CFG), Error (ERR), Power (PWR), Hardware Failure (FLT), Network Connection (FLT).

Error (ERR), Power (PWR), Hardware Failure (FLT), Network Status www.ge-drive.com (NS), EtherNet/IP™ Class I or Class

Module Status (MS),

Module Configuration Status (EtherNet/IP only) Ethernet

Communication Port Link/Active and 100 mbit

Ethernet ports 10/100 Mbit full-duplex and half-duplex RJ45 connector Galvanic isolation

Isolation 1500 Vrms, 50 to 60 Hz for 60 seconds, applied according to section 5.3.2.

Applied in accordance with IEC 60950 Section 5.3.2: 1991 Ethernet Broadcasts

Storm recovery capability of less than or equal to 5000 [ARP] frames per second for less than or equal to 5 minutes.

2.5 mm screwdriver J180 power connector included with each unit

The PROFIBUS DPV1 master module is a powerful communication interface for Quantum ® processors.

Developed under licence from Quantum ®, the module uses proprietary backplane technology to enable powerful data exchange with the processor.

The module supports the full master specification according to IEC 61158. The ability to transfer acyclic parameter data via Class 1 or Class 2 DPV1 services.

Enables the processor to easily communicate with slave devices that support the PROFIBUS DPV0/V1 protocol.

This module is the input/output module between the PROFIBUS network and the processor. The processor data transfer is asynchronous to the I/O data transfer on the PROFIBUS network.

Features Benefits

Easy to configure and manage ♦ Includes ProSoft Configuration Builder software for designing, configuring, and monitoring PROFIBUS networks

PROFIBUS DPV1 Master FDT (Field Device Tool) Communication DTM (PROFIBUS comDTM) software included.

(PROFIBUS comDTM) software for connecting any compatible FDT software container, FDT device DTM, and applicable PROFIBUS slave devices

Configuration of PTQ modules and PROFIBUS networks via Ethernet

Industry Recognition ♦ Schneider Electric CAPP (Collaborative Automation Partner Programme) certification

PROFIBUS Trade Organisation (PTO) certified

Rugged and reliable ♦ Modules built on Siemens ASIC ASPC2 Step E and Infineon C165 microprocessors

Firmware can be quickly upgraded

Compliant with Unity HEC Hot Standby feature specification.

Supports up to 6 PTQ-PDPMV1 modules per rack (hot standby supports up to 4 modules)

implementation of up to four)

Supports extended diagnostic data, alarm indication www.ge-drive.com and acknowledgement processing, multicast and broadcast messaging (DPV1)

Configuration

ProSoft Configuration Builder (PCB) provides a PC-based software configuration solution for managing module configuration files and viewing communications and network diagnostics.

The PCB is a powerful solution not only for new configuration files, but also for importing configuration information from previous installations (known jobs) into new projects.

General Specifications

– Single slot – Quantum backplane compatible

– Module is recognised as an option module with access to PLC memory

for data transfer

– Configuration data is stored in the ProTalk® module’s non-volatile memory

– Microsoft Windows XP, 2000 and NT configuration software included with module

– Up to six modules can be placed in a rack

– Local rack – modules must be placed in the same rack as the processor

– Compatible with all common quantum programming software packages, including Concept

(version 2.6 or later), Unity Pro (version 2.2 or later), ProWORX (version 2.20 or later) (HSHS)

or higher) (HSBY for Unity Pro environments only)

– Quantum data types supported: 3x, 4x

– High-speed data transfer on the backplane provides fast data update times

– Sample ladder files available

Functional Specifications

– Easy-to-use bus view drag-and-drop configuration interface via ProSoft

Configuration Builder software (see PSW-PCB datasheet)

– Monitors and modifies process data and DPV1 acyclic data, and provides online slave diagnostics

– Supports PROFIBUS PA slaves on the network via DP/PA coupler or link

– Supports up to 125 slave devices via repeaters

– Supports extended diagnostic data (DPV1)

– Supports all standard baud rates up to 12 Mbits/s

– Automatic baud rate detection at all valid PROFIBUS DPV1 rates

– Supports parameter read/write operations according to PROFIdrive 3.1 standard

– Supports synchronisation and freeze commands

– Alarm indication and acknowledgement processing (DPV1)

– Support for multicast and broadcast messages (DPV1)

– Conformity of the slave configuration to the processor determined by CRC checksums

– Includes FDT/DTM PROFIBUS master transport communication DTM software (part number PSW-CDTM-PDPM)

Hot Standby

– Hot standby function supports SE 140 671 CPUs

– Supports up to six PTQ-PDPMV1 hot standby modules per rack

– Provides health status for active master and passive

Auxiliary master health status

– PROFIBUS switchover time of 100 ms nominal, not to exceed 300 ms

– Cable break detection via segmented network slave count information

– Generation of PROFIBUS health information from the secondary master via FDL ping service

– No setup parameters are required. Module automatically detects hot standby system Physical characteristics

– PROFIBUS DPV1 RS-485 interface with 9-pin D-type female connector and isolated optocoupler

– Master LED status indicators for operation, network out of communication, and master token hold state

The ProSoft Technology Rapid Industrial Hotspot (RLX2-IHNF) provides secure wireless solutions for factory floor, SCADA automation,

SCADA automation, process control systems and mobile worker Wi-Fi infrastructure.

It operates in 2.4 or 5 GHz bands, including DFS channels, for indoor or outdoor applications.

The hotspot supports access point, repeater and client modes. 802.11n technology provides fast data rates of up to 300 Mbps.

This provides excellent packet-per-second performance and robust communications in harsh industrial environments.

802.11n MIMO and channel bonding support demanding wireless applications such as Ethernet I/O and high-resolution video.

The included IH Browser configuration and monitoring software allows users to view network topology, assign IP addresses, monitor network diagnostics and update radio firmware.

The optional OPC Diagnostic Server is ideal for managing wireless SCADA networks over long distances.

Features and Benefits

EtherNet/IP™ or Modbus® based PLC/PACs can use message commands to read diagnostic information from the radio, helping to reduce downtime when troubleshooting wireless networks.

802.11i, WPA-2 Personal/Enterprise with 128-bit AES encryption secures the network RADIUS security secures the network with advanced authentication and encryption Virtual Local Area Networks (VLANs) enable secure network segmentation

Network Address Translation (NAT) eliminates the need for machine builders to change IP addresses every time a machine is deployed

Quality of Service (QoS) provides data prioritisation for I/O control devices, video data, etc.

Ultra-fast roaming (less than 10 milliseconds) maintains seamless, high-speed connectivity with one or more devices on mobile equipment and machines such as cranes, AGVs, and transporters as they move between access points

IGMP snooping and packet filtering optimise UDP multicast traffic for superior EtherNet/IP I/O communications

Supports communication with multiple Ethernet devices when used with existing third-party wireless infrastructure

Supports AeroScout RTLS (Real-Time Location Service) tags by passing signals from the tag to the network

Supports Power over Ethernet (PoE) to reduce cabling costs

Disaster recovery feature allows radio configurations to be stored on a microSD card for quick replacement in the field

Serial network connectivity (Modbus, DNP 3. etc.) via 802.11 wireless network

Simple local and remote configuration, monitoring and wireless network www.ge-drive.com diagnostics via IH browser utility or SNMP

Related Product Recommendations:

5X00419G01 Ethernet Link Controller

1769-PB4 Power Module

IC660TBD025 GeniusI/O Terminal Assembly Module

BSFC-01C Charge Controller Board SP Kit Gate Driver Boards

IC660TBD024K GeniusI/O Terminal Assembly Module

1769-OF8C Analog Output Module

ILX56-MM Message Manager for Industrial Communications

BSFC-02C Charge Controller Universal Brake Chopper1769-OF2 Analog Output Module

The PTQ-PDPS PROFIBUS DP Slave Communication Module allows compatible processors to connect easily with PROFIBUS DP master devices.

The PROFIBUS DP slave protocol driver supports PROFIBUS V0 slave implementations.

Provides robust data transfer between the module and the processor.

User-configurable data mapping and DP port www.ge-drive.com operation make the interface an easy-to-use and powerful data transfer tool.

The PTQ module’s configuration/debug serial port connects a PC to the module for configuration, status, monitoring and troubleshooting (serial cable shipped with product).

After editing on the PC, the configuration file is downloaded and stored on the PTQ module.

PROFIBUS DP slaves have access to the input and output images of the device, with up to 244 bytes of input and output data, for a total of up to 400 bytes.

The user can map these input and output data blocks into the module’s data memory for maximum flexibility and data transfer with other protocols.

Features Benefits

PROFIBUS DP-V0 slave protocol interface

 Adds PROFIBUS DP slave device monitoring to the network

 Simple configuration – GSD file available

 122 word input/122 word output, max. 200 word input/output

Licensed Backplane Technology  Manufactured under licence from Rockwell Automation®.

 High-speed data transfer between PTQ module and processor

 Installed as a generic 1756 module, includes ladder logic example

 View module data and status in RSLogix™ 5000 controller tags and UDTs

Includes ProSoft Configuration Builder software

 Graphical drag-and-drop configuration tool for simple module configuration

 Easy-to-use diagnostic window with menu-driven hardware and protocol diagnostics

 View module database contents via serial connection to a desktop PC

Backed by ProSoft technology

 20-year history of providing high-quality, reliable solutions

 Free, unlimited worldwide technical support over the phone, including pre-sales, setup or troubleshooting support, to help you get up and running quickly and stay up and running longer

 Three-year warranty to ensure reliability and protect against equipment failure

 Free ProSoft software tools are tightly integrated with our hardware …… Quick and easy total solutions to help you tailor our products to your application needs.

Configuration

ProSoft Configuration Builder (PCB) provides a PC-based software configuration solution that

for quickly and easily managing module configuration files, as well as viewing communications and network diagnostics.

PCB is a powerful solution not only for new configuration files, but also for importing configuration information from previous installations (known jobs) into new projects.

General Specifications

 Single slot – compatible with Quantum backplanes

 Module recognised as an option module with access to PLC memory for data transfer

 Configuration data is stored in the ProTalk® module’s non-volatile memory

 Modules are supplied with Microsoft Windows XP, 2000 and NT configuration software

 Up to four modules in one rack

 Local rack – modules must be placed in the same rack as the processor

 Compatible with all common quantum programming software packages, including Concept (version 2.6 or higher),

Unity Pro (2.2 or later), ProWORX (2.20 or later) and ModSoft.

 Supports quantum data types: 3x, 4x

 High-speed data transfer across backplane provides fast data update times

 Provides sample ladder files

Related Product Recommendations:

MMS6120 Dual Channel Bearing Vibration Measurement Module

D2D160-BE02-11 AC Centrifugal Fans Cooling Fan Assembly

D1961SH45T Rectifier Diode Industrial Robot Parts and Accessories

IC200ALG327H 12-Channel 13-Bit Voltage Analogue Output Module

IC200ALG260 Analogue Input Module

HE697RTM700B High Speed Counter Module

IC687BEM713B Fanuc 90-70 Series Bus Transmitter Unit

DS200KLDBG1ABC DS215KLDBG1AZZ03A Automation Module

DeltaVrm VerticalPlus Input/Output Subsystem carrier

8115-DO-DC 8-Channel Digital Output Module

The MVI56E-SIE Siemens Industrial Ethernet Communication Module allows Rockwell Automation ControlLogix

The Siemens Industrial Ethernet Communication Module allows Rockwell Automation ControlLogix Programmable Automation Controllers (PACs) to easily connect as Ethernet clients to up to 20 Siemens S7-200. S7-300. S7-400. S7-1200. and S7-1500 PLCs operating as Ethernet servers.

The module uses the ProSoft Configuration Builder (PCB), which provides graphical configuration tools

for managing module configuration files, as well as using the high-speed Ethernet port to view communications and module diagnostic information.

With ladder logic enable/disable commands, a variety of Siemens S7 CPUs www.ge-drive.com can support a wide range of applications without having to reconfigure the module.

Data transfer with ControlLogix ® PAC uses scheduled I/O data for faster updates and better performance.

General Specifications

 Single-slot 1756 ControlLogix backplane compatible

 10/100 Mbps auto cross-detect Ethernet configuration and application port

 User-definable module data memory map of up to 5000 16-bit registers

 Enables CIPconnect network configuration and diagnostic monitoring using ControlLogix 1756-ENxT and 1756-CNB modules and EtherNet/IP passthrough communication

 Additional instructions (AOIs) for data transfer between modules and processors

 4-digit alphanumeric scrolling LED displays status and diagnostic data

 ProSoft Discovery Service (PDS) software for locating modules on the network and assigning temporary IP addresses

 Personalization Module – non-volatile, industrial-grade CF card for storing network and module configurations, allowing for quick product changes in the field by transferring CF cards

Related Product Recommendations:

IC660ELB912J Gas Turbine Control System

IC660TBA026M Current Sourced Analog Input I/O Block and Accessory Kit

DeltaVrm VerticalPlus Input/Output Subsystem carrier

1769-OF2 Analog Output Module

IC690RFH0088 Multimode Reflective Memory Hub

1769-OF8C Analog Output Module

1769-PB4 Power Supply Module

C87-11006 Solid-state sensor module Signal processor unit

CA5-01 Auxiliary Contacts Front Mounting Block Screw Clip

CA5-10 1-pole front-mounted auxiliary contact block Equipped with screw terminals

ProSoft Technology® inRAx® Message Manager is a single-slot solution that

Connects and transfers plant and factory process automation monitoring and control data between automation islands of different platforms, networks and protocols.

The inRAx Message Manager is an easy-to-use data transfer engine for the ControlLogix™ 1756 platform.

Supports Rockwell Automation® Programmable Logic Controller (PLC) and Programmable Automation Controller (PAC) network protocols.

as well as platforms and devices using Siemens Industrial Ethernet and Modbus TCP/IP protocols.

The ILX56-MM helps system integrators and end-users reduce the engineering effort required to coordinate data transfer between multiple control systems in factory and plant automation applications.

The Message Manager enables PLC/PAC data exchange without the need for www.ge-drive.com additional PLC programming for specific messages, simplifying and streamlining data connection and transfer operations.

Functional Advantages

Licensed Backplane Technology

Manufactured under license by Rockwell Automation

High-speed data transfer between modules and processors

Performs PLC/PAC data transfers

Eliminates the need to program PLC/PAC messages

Built-in network configuration tool

No software to purchase, install or maintain Easy-to-use interface

Two built-in Ethernet ports

Connects to Modbus TCP/IP and Siemens Industrial Ethernet

Backed by ProSoft technology

20 years of commitment to providing you with high-quality, reliable solutions

Free, unlimited worldwide technical support available by phone at any time for pre-sales, setup or troubleshooting support to help you get up and running faster and stay up and running longer.

Three-year warranty to ensure reliability and prevent equipment failure

Free ProSoft software tools tightly integrated with our hardware …… A quick and easy total solution to help you adapt our products to your application.

Configuration

Message Manager is both a communications interface and a message transaction engine. Easy-to-use configuration tools are web-based and built into the module for module and network configuration, diagnostics, and upload/download.

Module for module and network configuration, diagnostics and uploads/downloads. telegram programming is no longer required for PLC to PLC data transfers.

These transfer setups can be accomplished in one location with up to 16 controllers, including a variety of networked Rockwell Automation controllers and PLCs/PACs located on Modbus TCP/IP or Siemens Industrial Ethernet networks.

General Specifications

– Built-in web-based configuration tool

– Requires Internet Explorer 7 for full operation

– Single slot – 1756 backplane compatible

– Remove and insert under power – RIUP

– Local or remote rack

– Status and diagnostics scrolling display

Functional Specifications

Supported protocols: Modbus TCP/IP and Siemens Industrial Ethernet are supported through the built-in Ethernet port.

EtherNet/IP, ControlNet, Data Highway+ (DH+), and Data Highway 485 (DH485) are supported through the Rockwell Automation (RA) 1756 communications bridge module.

Data transfer: Transfer data between up to 16 individually configurable communication interface connections

Interfaces: Select RA, Modbus TCP/IP, or Siemens IE protocols for each interface

Label Browse and use the label name of any RA PAC or any Allen-Benix PAC in the ControlLogix local or remote chassis.

Chassis or the tag name of any Allen-Bradley® PLC or RA PAC.

Label name in the network. Create user-defined labels for Modbus and Siemens data addresses.

Transfer Lists: Create data exchange lists using source and destination tags

Triggers: Define events that can cause one or more transfer lists to be executed.

Triggers can be based on tag values or predetermined time intervals.

Security View configuration information without logging in. You must log in to change the configuration. Project-level users can change the configuration and start/stop data transfer operations (i.e., switch between running and idle).

Administrator-level users can make project-level changes and assign user names, passwords, and security access levels to all users.

Internal Date and Time: Can be set manually or synchronized with ControlLogix or CompactLogix. Synchronization frequency can be infrequent, hourly, daily, every 8 hours, or every 12 hours.

Configuration Data: Can be saved offline or to an on-board flash card.

Configuration Utility: Includes built-in help. Online configuration only

Setup Mode: Setup mode allows you to temporarily set the Message Manager network port settings to default values. Setup mode also allows you to reset the default administrative password.

PROFIBUS DP Slaves

Communication modules

MVI69-PDPS

The MVI69 PROFIBUS DP Slave Communication Module allows CompactLogix I/O

compatible processors to connect easily with PROFIBUS DP master devices.

Features and Benefits

The PROFIBUS DP Slave Protocol Driver supports the PROFIBUS V0 slave protocol, providing robust data transfer capabilities between the module and CompactLogix processors.

User-configurable data mapping and DP port operation make the interface an easy-to-use and powerful data transfer tool.

The MVI69 Module Configuration/Commissioning Serial Port connects a PC to the module for configuration, status, monitoring, and troubleshooting (a serial cable is included with the product).

After editing on the PC, the configuration file is downloaded and stored on the MVI69 module.

PROFIBUS DP slaves can access the input and output images of the device with up to 244 bytes of input and output data and up to 400 bytes in total.

Users can map these input and output data blocks into the module’s data memory for maximum flexibility and data transfer with other protocols.

General Specifications

– Single slot – 1769 backplane compatible

– Module is treated as an input/output module with access to processor memory for data transfer between the processor and the module

– Ladder logic is used to transfer data between the module and the processor. A ladder example file is included.

– Obtains configuration data from a configuration text file downloaded to the module. Sample configuration file included.

– Supports CompactLogix and MicroLogix 1500 LRP controllers except 1769-L23E-QBFC1B, 1769-L16x, and 1769-L18x.

Functional Specifications

PROFIBUS slaves have access to the input and output images of the device with up to 122 words of input and output data and up to 200 words in total.

– All standard baud rates up to 12 Mbps are supported.

– Configuration data is stored in the non-volatile memory of the MVI69 module

– Supports extended diagnostic data (DPV0)

– Automatic baud rate detection at all valid PROFIBUS V0 baud rates

– Multiple modules in one rack

Other Products

ProSoft Technology offers a full range of hardware and software solutions for a variety of industrial communication platforms.