The IC200MDD841 high speed counter module is a GE Fanuc product.
This module is manufactured as part of the VersaMax product line.
It has mixed discrete I/O points with 12 positive logic outputs and 20 positive logic inputs and is also configurable.
About the IC200MDD841
The IC200MDD841 module is a high-speed counter module manufactured by GE Fanuc.
It is part of the Versamax series and has mixed discrete inputs and outputs, including 12 positive www.ge-drive.com logic outputs and 20 positive logic inputs, some of which are configurable.
Devices connected to these I/O connectors have two states: on and off.
The GE Fanuc IC2MDD200 module has no protection features, such as internal fuses or isolation of individual channels.
It supports a variety of input and output configuration settings, such as pulse-width modulation, ramp pulse train, pulse train, and high-speed counters.
When this module is set to its default configuration, it has 841 Type A high-speed counter outputs and inputs.
These high-speed counters process pulse signals at 4 kHz. In addition, in the default configuration, the module has 80 standard outputs and 8 standard inputs.
The backplane powers the GE Fanuc IC200MDD841 high-speed counter module, but a separate power supply powers all external output devices.
When the module is connected to a backplane power supply rated at 5 volts, it draws 30 milliamps of current.
The inputs and outputs of the IC200MDD841 module operate at 24 volts DC.
The module’s on/off state current ratings are 3 to 8 mA/0 to 0.5 mA, respectively.
It measures 66.8 mm or 2.63 inches long, 110 mm or 4.3 inches wide, and 50 mm or 1.956 inches deep.
The high-speed counter module provides error detection and displays up to 13 words of status data.
It has on-board LEDs that display device status information.
Leave a comment
Your email address will not be published. Required fields are marked *