News - ge-drive Automation

2024-11-02 BY jonson

IN GE

GE VMIVME-1150 64-bit Optically Coupled Digital Input Board

-64 optically coupled digital inputs

-5 V to 48 VDC input range

-High isolation, 1.000 V continuous, 7.500 V pulse voltage

-Filter input options

-Dual I/O connectors

-Contact closure sensing

-Voltage or current source input options

-Positive or negative true input options

-Dual Eurocard form factor with front panel

8-bit or 16-bit data transfer

-Unprivileged or supervisory I/O access

-Highly reliable DIN-compatible input connectors

Functional Features

Board Features:

This 64-bit optically coupled digital input board is designed and optimized for the VME bus.

The VMIVME-1150 is highly isolated and provides a flexible, low cost, high noise www.ge-drive.com immunity 8-byte digital input port. The functional block diagram is shown below.

Compatibility:

The VMIVME-1150 is a standard double height printed circuit board that is electrically and mechanically compatible with the VME bus.

Input Organization:

Eight input ports, each eight bits wide. The ports are organized as eight consecutive 8-bit read-only registers.

Addressing Scheme:

Each 8-bit port is individually addressable anywhere within an 8-bit or 16-bit boundary.

Short-circuit monitoring or short-circuiting anywhere within unprivileged I/O space.

Board Address:

The board address is selected by the on-board DIP switches. Runs in any available slot on the VMEbus backplane except slot 1.

VMEbus Access:

The address modifier bits are decoded to support short supervised or unprivileged short I/O access. A jumper is provided to support this option. The board is factory configured for short supervised I/O access.

VME Bus Reply:

The DTACK reply is a response to a data select (DS0 or DS1) and the decoded board address.

Board Address.

Data Transfer Type:

D8. D16

Access Time

Maximum 250 milliseconds

Data Polarity

Sorted by positive or negative true. This depends on the input assertion of the board. To assert an input, current must flow through the LED in the optocoupler.

For positive “true” boards, this current will indicate a logic “1” to the VME bus. If the board is ordered with negative true logic, the board will display a logic zero to the VMEbus when current is flowing through the LED.

Input Characteristics

Signal Conditioning:

The input can be either a voltage or current source with a voltage range of 5 to 48 V. The input can be either a voltage or current source with a voltage range of 5 to 48 V.

Prosoft MVI69-PDPS PROFIBUS DP Slave Communication Module

PROFIBUS DP Slaves

Communication modules

MVI69-PDPS

The MVI69 PROFIBUS DP Slave Communication Module allows CompactLogix I/O

compatible processors to connect easily with PROFIBUS DP master devices.

Features and Benefits

The PROFIBUS DP Slave Protocol Driver supports the PROFIBUS V0 slave protocol, providing robust data transfer capabilities between the module and CompactLogix processors.

User-configurable data mapping and DP port operation make the interface an easy-to-use and powerful data transfer tool.

The MVI69 Module Configuration/Commissioning Serial Port connects a PC to the module for configuration, status, monitoring, and troubleshooting (a serial cable is included with the product).

After editing on the PC, the configuration file is downloaded and stored on the MVI69 module.

PROFIBUS DP slaves can access the input and output images of the device with up to 244 bytes of input and output data and up to 400 bytes in total.

Users can map these input and output data blocks into the module’s data memory for maximum flexibility and data transfer with other protocols.

General Specifications

– Single slot – 1769 backplane compatible

– Module is treated as an input/output module with access to processor memory for data transfer between the processor and the module

– Ladder logic is used to transfer data between the module and the processor. A ladder example file is included.

– Obtains configuration data from a configuration text file downloaded to the module. Sample configuration file included.

– Supports CompactLogix and MicroLogix 1500 LRP controllers except 1769-L23E-QBFC1B, 1769-L16x, and 1769-L18x.

Functional Specifications

PROFIBUS slaves have access to the input and output images of the device with up to 122 words of input and output data and up to 200 words in total.

– All standard baud rates up to 12 Mbps are supported.

– Configuration data is stored in the non-volatile memory of the MVI69 module

– Supports extended diagnostic data (DPV0)

– Automatic baud rate detection at all valid PROFIBUS V0 baud rates

– Multiple modules in one rack

Other Products

ProSoft Technology offers a full range of hardware and software solutions for a variety of industrial communication platforms.

2024-11-02 BY jonson

IN Eaton

Eaton DPM-MC2 Communication Card

Aims and purposes of this document

The purpose of this document is to provide a reference for connecting, commissioning and operating the DPM-MC2 Communication Card.

Use of the card

The DPM-MC2 card can only be used in MICRO PANEL MC2 series devices equipped with the corresponding slot.

The DPM-MC2 card is a PROFIBUS master. The development is based on the EN50170 standard.

The card can only be mounted and dismounted when the device is powered off.

Function and control indicators

Connector assignment

The plug connectors and connector assignment comply with the Profibus standard (EN50170). Only the transceiver signals and the power terminals for line termination are provided.

The power supply terminals DGND (0V, pin 5) and VP (+5V, pin 6) are only intended for powering the cable terminals (terminals) and must not be used for any other purpose. the CNTR-P signal (pin 4) is used in conjunction with a repeater.

Bus segments must be terminated at both ends.

No more than 2 bus terminals must be activated per bus segment!

At least one of the two bus terminals must be powered www.ge-drive.com by the bus station!

Maintenance, repair, disposal

Maintenance

Repairs can only be carried out by the manufacturer or an authorized service center. In this case, please contact your local MICRO PANEL dealer or Micro Innovation’s technical support department.

The warranty does not apply if any modifications are made to the device that are not described in this document.

Shipping

The original packaging must be used when transporting the device.

Disposal

Memory cards that are no longer in use must be disposed of properly or returned to the manufacturer or seller for proper disposal.

2024-11-02 BY jonson

IN GE

GE IS215AEPAH1A Fan Control Card Printed Circuit Boards

The IS215AEPAH1A AEPA card module assembly is manufactured by GE Energy for use with the Mark VIe wind turbine control system family.

Product Description.

This IS215AEPAH1A printed circuit board was originally designed for General Electric’s Mark VIe series.

This Mark VIe series is a line of wind turbine system control and system control component products.

These products are actually manufactured by GE Energy, an alternative energy manufacturing company that exists as a shell company for retailers of the General Electric industrial giant.

This is a revised printed circuit board, modified from its original IS215AEPAH1 parent board by including a single-function revision rated “A”.

This GE Energy Mark VIe Wind Turbine www.ge-drive.com Series PCB can be more accurately defined as an alternative energy power assembly by its functional description.

Hardware Tips and Specifications

This IS215AEPAH1A Alternative Energy Power Assembly may be best understood when its hardware elements are contextualized according to the intended function of this printed circuit board.

The first descriptor for the function of this AEPA-abbreviated product is present in its functional description as an alternative energy power supply assembly.

This functional description happens to be an exact match to the AEPA functional acronym for this product, a rare blessing for a specialized Mark VIe series product.

The series to which this IS215AEPAH1A board belongs actually provides additional insight into the functionality of this product.

Considering the place of the IS215AEPAH1A PCB in the Mark VIe family of wind turbine control systems, it is not surprising that this GE Energy board is dedicated to wind turbine applications.

Now that the functional status of this IS215AEPAH1A PCB as an alternative energy power supply assembly has been described.

Then it is possible to highlight some of the hardware specifications available for this Mark VIe wind turbine series product.

Considering this product’s place in the specialized and recently developed Mark VIe wind turbine family, little original product-specific instruction manual material detailing the hardware of this IS215AEPAH1A PCB exists online.

That said, this initial Mark VIe series label identifies the board as an alternative energy power supply assembly with special component versions.

This IS215 series label has dual naming capabilities for this IS215AEPAH1A product; it also outlines its status as a domestic GE printed circuit board.

The original manufacturing location of this PCB can be traced more specifically to GE’s plant location in Salem, Virginia.

In this IS215AEPAH1A part number, the IS215 series label is followed by an example of the AEPA functional acronym.

It is itself followed by the H1 series grouping label, which, like the IS215 series label mentioned earlier, provides a dual naming convention for this product.

This H1 grouping label indicates that the product is a conformal coated printed circuit board with Mark VIe series grouping.

While the conformal style of PCB coating specific to this power supply assembly is well documented, given its widespread use on General Electric circuit boards, the first Mark VIe grouping of this part is the Mark VIe grouping.

The true meaning of the first set of Mark VIe series alignments for this component has been lost.

The last A digit of the IS215AEPAH1A part number is a reference to a Class A functional revision of this part, which may significantly affect the performance specifications and original measured dimensions of this IS215AEPAH1A product.

2024-11-02 BY jonson

IN SBS

SBS IP-Quadrature Quadrature Decoder IndustryPack Module

Product Description

IP-Quadrature provides high density, cost-effective flexible implementation of four quadrature decoder channels. Channels may also be used as general purpose counters. Four independent channels provide 24-bit resolution, programmable modes, programmable polarity, interrupt capability, differential or single-ended (RS-422 or TTL/CMOS) input, read-on-the-fly capability, and a count frequency of 0 to 10 MHz.

Quadrature encoders are popular sensors that provide accurate, low cost incremental motion sensing. Most commonly, they are shaft encoders that provide 512 to 2048 counts per revolution.

They are also commonly used as linear encoders with resolutions down to 0.005 inch. They are available in nearly any length desired. Most encoders are now optical, using molded assemblies consisting of a pair of LEDs, lenses, photo-sensors, and simple electronics. For rotary motion the assembly senses alternating opaque and clear lines on a rotating wheel. For linear motion the alternating lines may be on a fixed bar and the sensor assembly moves, or vice-versa. The pair of LED and photo-sensors are offset about one-half line width so that direction of motion may be sensed by observing the relative phase of the two outputs. Typical quadrature encoder outputs are a pair of digital logic signals that are nominally 90° out of phase. Some encoders also provide an

“index” pulse output once per revolution to provide absolute position information. Most modern encoders run from +5 volts and provide CMOS/TTL logic outputs and/or RS-422 differential logic outputs. RS-422 is recommended where possible because of its inherent noise immunity and the ability to run long distances. TTL logic levels should normally be restricted to cables less than ten feet in length. Quadrature encoders are available from Hewlett-Packard, US digital, and other sources.

The general purpose input structure permits differential input from line drivers (RS-422 levels) or single-ended logic level input (“TTL”) directly from most sensors. Programmable TTL resistive terminators provide for flexible high-quality signal termination.

There are three inputs per channel. For normal quadrature operation the two quadrature inputs are called X and Y. These inputs are sometimes called A and B lines from encoders. The X and Y inputs are normally driven 90° out of phase. There is also a control input on each channel called Z.

Its function is programmable, but it typically operates, if used, as an index or latch input.

There is a programmable prescaler for each channel that may be set for X1, X2 or X4 operation.

Vectored interrupts are fully supported. Interrupts are individually maskable. Selectable conditions are interrupt on borrow and interrupt on match (compare).

RS-422 differential input lines are www.ge-drive.com normally terminated with 120Ω resistors. Users may remove these socketed resistor networks or replace them with a different value if desired.

Each channel consists of a programmable input section, a 24-bit up/down counter block, a 24-bit capture/match register, and a 24-bit output latch. The output latch permits accurate “on-the-fly” reading of quadrature position values. The capture/match register may be used as either a hardware “capture” register to record exact mechanical position or to provide an interrupt any arbitrary programmable quadrature position value.

The all CMOS design is inherently low power. Up to 16 quadrature channels may be implemented in one host system slot.

Key Features

• Four quadrature decoder channels, independently programmable

• Any channel may also act as a general purpose counter

• 24-bit resolution per channel

• DC to 10 MHz general purpose count rates

• DC to 1.2 MHz quadrature count rates (higher count rate in X1 and X2 modes)

• Counters readable “on the fly”—24-bit output register

• 24-bit register for capture or match interrupt on each channel

• Inputs may be differential or single-ended

• Direct connection to most sensors

• Programmable TTL resistor termination

• Each channel has a programmable control input

• Control input may be used to capture exact position on the fly

• Each channel may be used as a general purpose up/down counter

• Full programmable interrupt support

• Programmable modes; programmable prescaler: 1X, 2X, 4X.

• Individually programmable polarities for Count and Control inputs

• All CMOS

• Up to 16 counter channels per VME slot

Main Features

High-precision decoding of orthogonal signals

Wide operating temperature range for industrial environments

Compact industrial package form factor

Easy integration with compatible systems

Applications

Motion control systems

Position sensing and feedback

Robotics and automation

Industrial machinery

2024-11-02 BY jonson

IN GE

GE IS215VCMIH2CC Bus Master Controller Module Communication Converter Card

Functional Description

The IS215VCMIH2CC is a GE-developed bus master controller module that is part of the Mark VI control system.

It is part of the Mark VI control system.The VCMI bus master controller plays a key role in the system architecture as an integrated communications interface that coordinates the exchange of data and commands.

As the link between the master controller and the array of I/O boards, the VCMI ensures smooth and efficient communication channels and facilitates seamless integration of the various components.

In addition, VCMI’s importance is reflected in its connection to the wider system control network, known as the IONet, which plays a vital role in coordinating communications across the network infrastructure.

Features

A distinctive feature of the VCMI is that it acts exclusively as a VMEbus master within the control and input/output racks.

The VCMI is responsible for the VMEbus, a standardized computer bus structure, and oversees the coordination of data transfer and control signals within these racks.

The VCMI manages the assignment of unique identification (ID) to all boards in the rack and their associated terminal boards.

This ID management function ensures that the various components within the rack are identified and interacted with in a systematic and organized manner, thereby increasing the overall efficiency and reliability of the system.

The VCMI Bus Master Controller is a multifaceted communications hub that seamlessly connects controllers, I/O boards and the broader system control network.

As a VME Bus Master Controller in a given rack, it enhances its ability to manage and optimize the flow of information, ultimately improving the performance and cohesiveness of the integrated system.

Board Type: 6U High VME Boards

The boards specified are classified as 6U High VME boards and are dimensioned to meet the widely adopted VME standard. At 6U high, the boards conform to a standard form factor and are compatible with a range of systems and platforms that meet the same specifications.

At 0.787 inches wide, this VME board integrates seamlessly into the VME chassis, contributing to the modularity and scalability of the overall system.

Processors

Texas Instruments TMS320C32 32-bit Digital Signal Processor: At the heart of this VME board is the highly capable Texas Instruments TMS320C32.

This processor is a 32-bit digital signal processor (DSP) known for its ability to handle complex mathematical calculations and signal processing tasks.

The TMS320C32 is a rugged, purpose-built processor ideally suited for applications requiring high-speed, efficient digital signal processing, www.ge-drive.com and is therefore well suited to the intended function of this board.

Memory

Dual-port memory, 32-bit transfer configuration 32 Kbytes: The memory architecture of this VME board is designed for optimal performance and data processing.

The board is equipped with dual-ported memory, which facilitates simultaneous access to data from multiple sources, increasing overall efficiency.

The memory configuration includes 32 Kbytes of SRAM (Static Random Access Memory) in a 32-bit transfer setup.

This memory selection meets the requirements of data-intensive applications, ensuring fast access and retrieval of information.

SRAM, 64k x 32; Flash, 128k x 8: For further memory specifications, the boards are equipped with 64k x 32 SRAM, providing a large cache for storing and processing data in real time.

In addition, a 128k x 8 Flash memory further extends the board’s storage capacity, providing non-volatile memory for program storage and data retention.

This dual-memory configuration meets the diverse needs of the applications supported by the board, balancing speed and data persistence.

Honeywell FC-SCNT01 51454926-176 Safety Controller Module

OVERVIEW

The Honeywell FC-SCNT01 is a safety controller module designed for industrial process safety applications.

It acts as the brain of the Safety Instrumented System (SIS), performing critical Safety Instrumented Functions (SIFs) to maintain safe operations.

Functional Features

Dual-channel architecture: Ensures redundancy and fault tolerance for reliable safe operation.

SIL 3 certification: Highest level of safety integrity for critical applications.

Eight channels: Flexibility to monitor a wide range of process parameters.

24VDC input voltage: Compatible with www.ge-drive.com standard industrial power supplies.

400mA output current: To drive safety-related actuators and devices.

Technical Specifications

Number of channels 16 (8 inputs, 8 outputs)

Rated Voltage: 24VDC

Refer to data sheet for current ratings.

Safety ratings Conforms to relevant safety standards (ATEX, IECEx)

Operating Temperature Typically -40°C to +70°C

Main Functions:

Input Functions: The FC-SCNT01 module is capable of receiving input signals from field devices, such as fire alarm signals from smoke detectors, door and window opening and closing status, etc. The input signals are processed and then processed by the FC-SCNT01 module.

These input signals are processed and sent to the main controller of the security system.

Output Function: The module is able to receive output commands from the main controller and convert these commands into appropriate control signals to control the field devices.

For example, when the controller receives a fire alarm signal, it can send commands through the FC-SCNT01 module to cause door locks to open automatically or to activate an evacuation alarm.

Communication Interface: FC-SCNT01 modules usually use standard communication protocols to communicate with the host controller to ensure reliable data transmission in the system.

Power supply and power isolation: Modules are usually equipped with power isolation to ensure that no damage is caused to the system in case of power failure or abnormal conditions.

Status Indicators: Modules may be equipped with status indicators to indicate the status of input/output signals, power supply status, and possible fault status.

Overall, the Honeywell FC-SCNT01 51454926-176 is a powerful input/output module that is

capable of receiving and processing input signals from field devices and controlling field devices according to the commands of the main controller, and is an integral part of the safety system.

2024-10-31 BY jonson

IN Rexroth

Rexroth VT 2000-52 Bosch Rexroth Electrical Amplifiers

Features:

– Ideal for controlling direct-acting and pilot-operated proportional pressure control valves without electrical position feedback

– Differential Inputs

– Additional command value input, 0 to +9 V

– Ramp generator with separately adjustable rising and falling ramps

– Clock current output stage

– Clock Current Output Stage Reverse Voltage Supply Polarity Protection

– Short circuit protection

Function Description

The command value voltage can be applied to command value input 1 directly or via an external command value potentiometer using the regulated voltage of + 9 V of the power supply unit [8].

For this input the following conditions are valid: + 9 V = + 100 % 1).

Command value input 2 is a differential input [1] (0 to + 10 V). This input must be used if the command value is fed forward from an external electronic device with another reference potential (e.g. from the PLC).

This input must be used. When cutting in or out the command value voltage, take care to connect the two signal lines to or disconnect them from the input.

Prior to transmission, the two command values are summed [2] and fed to the potentiometer [3], which is available on the front panel of the card and is used as an attenuator to limit the maximum command value.

The Downstream Ramp Generator [4] generates a ramp-shaped output signal from the step input signal. The time constant of this signal can be adjusted to ramp up and ramp down using two potentiometers.

The specified ramp time is related to the command value step change of 100% and can be about 1 sec. or 5 sec. depending on the jumper setting. If a command value step change of less than 100 % is applied at the input of the ramp generator or when the attenuator [3] is set, the ramp time can be adjusted upwards and downwards.

or when the attenuator [3] is active, the ramp time is shortened accordingly.

With the aid of the external contact “ramp up/down”, the ramp time can be set to a minimum value (approx. 30 ms) for the upper and lower ramp times respectively.

The output signal of the Ramp Generator [4] is an internal current command value and is fed into the measurement socket “w” on the front panel of the card.

In addition, the command value is transferred to the current output stage [6] via the current regulator [5].

The current regulator [5] adds the value of the www.ge-drive.com bias current potentiometer “Zw” (R130) to the value of the ramp generator.

The current command value is modulated by the clock pulse encoder signal [7]. The clocked actual current value acts like a constant current and superimposes a jitter signal in the valve solenoid.

The actual current value through the solenoid valve can be measured at socket “I”. Here, a voltage of 800 mV corresponds to a current of 800 mA.

Emerson A6500-RC 16-Channel Output Relay Module

The 16-channel output relay module is designed to provide high reliability for the plant’s most critical rotating machinery.

This monitor is used in conjunction with the AMS 6500 ATG to form a complete API 670 machinery protection monitor.

Applications include steam, gas, compressor and hydraulic turbine machinery.

Any channel of clear, alarm or warning signal can be selected as an input to the 16-channel output relay module.

Configuration is accomplished using Boolean logic, applying time delays and selecting output relays.

Easy-to-use software provides a graphical logic display that graphically guides the user through the configuration.

The AMS 6500 Machinery Health Monitor is an integral part of PlantWeb® and AMS software.

PlantWeb provides operation in conjunction www.ge-drive.com with Ovation® and DeltaV™ process control systems – integrating machinery health.

AMS software provides maintenance personnel with advanced predictive and performance diagnostic tools that enable them to identify machine failures early with confidence and accuracy.

3U-sized, 2-slot plug-in modules cut cabinet space requirements in half compared to traditional 6U cards.

API 670-compliant, hot-swappable modules.

66 inputs, 16 logic networks, 16 relay outputs.

The A6500-RC is a 10TE wide module for use in the A6500-SR rack.

2024-10-31 BY jonson

IN GE

GE Multilin 745-W2-P1-G1-HI-T-H Transformer Protection Relay

The GE Multilin 745-W2-P1-G1-HI-T-H Transformer Protection Relay features transformer overload protection and overexcitation protection to ensure smooth transformer operation.

It also monitors, records and displays trends in system variables such as temperature, voltage, power, energy consumption and rate of change of frequency.

Product Description

The 745-W2-P1-G1-HI-T-H is a GE Multilin transformer protection relay that extends transformer life expectancy and optimizes transformer performance.

It protects and manages small, medium and large transformer systems. Part of the 745 Series, the 745-W2-P1-G1-HI-T-H features transformer overload protection and overexcitation protection to keep transformers running smoothly.

It also monitors, records and trends system variables such as temperature, voltage, power, energy consumption and frequency rate of change.

These values can be quickly referenced through the relay’s software program, Enervista 745.

The Enervista 745 software program can also be used to edit setpoints. Utilizing GE Multilin’s quick connect feature, the

Connecting the relay to a computer is simple with the GE Multilin Quick Connect feature. The connection can be established via Ethernet, the RS232 port on the front, or the RS485/RS422 port on the back of the panel.

The program assists in managing system setup www.ge-drive.com and automatically flags programming errors or conflicts as the user adjusts setpoints.

The 745-W2-P1-G1-HI-T-H’s enhanced 40-character display is larger than the base model and includes an extended keypad for easy manual setpoint entry.

The enclosure is 9″ high by 7″ wide by 7 ⅛” deep. The transformer protection system can be mounted on a standard 19″ panel, but care should be taken that the enclosure door opens and closes freely without contact with other components.

A number of LEDs on the front of the chassis alert the user to various statuses and errors in real time.

Frequently Asked Questions about the 745-W2-P1-G1-HI-T-H

What makes the Multilin 745-W2-P1-G1-Hi-T-H unique compared to other transformer protection relays in the 745 series?

The 745-W2-P1-G1-Hi-T-H Multilin transformer protection series contains unique options that differ from other part numbers.

Notably, the “-H” option indicates that the relay has a harsh chemical environment conformal coating for operation in harsh environments.

The T option in the 745-W2-P1-G1-Hi-T-H Multilin Dual Winding Transformer Management Relay differs from other relays in the 745 system in terms of display and Ethernet.

Transformer protection systems without the T option have either a basic display (B) or an enhanced display (E) with a larger LCD.

The T option comes with an enhanced display, larger LCD, and 10Base-T Ethernet.

How does the 745-W2-P1-G1-Hi-T-H Multilin monitor and manage power transformers?

The 745 Multilin series is a series of transformer protection systems that have the ability to manage and protect power transformers.

For this reason they are known as transformer management relays. As with the other relays in the 745 series, the

745-W2-P1-G1-Hi-T-H is capable of using frequency, percentage difference, overcurrent and overexcitation protection elements as well as harmonic (single harmonic and total harmonic (THD)) tracking elements in one system.

745-W2-P1-G1-Hi-T-H Multilin Is there two or three windings per phase?

The 745-W2-P1-G1-Hi-T-H Multilin transformer protection system has two windings per phase.

Comments on 745-W2-P1-G1-HI-T-H

The conformal coating of the 745-W2-P1-G1-HI-T-H adds a protective layer that shields the relay from moisture, chemicals, dust, and temperature extremes: this makes it an excellent choice for harsh environments.

GE VMIVME-1150 64-bit Optically Coupled Digital Input Board

Prosoft MVI69-PDPS PROFIBUS DP Slave Communication Module

Eaton DPM-MC2 Communication Card

GE IS215AEPAH1A Fan Control Card Printed Circuit Boards

SBS IP-Quadrature Quadrature Decoder IndustryPack Module

GE IS215VCMIH2CC Bus Master Controller Module Communication Converter Card

Honeywell FC-SCNT01 51454926-176 Safety Controller Module

Rexroth VT 2000-52 Bosch Rexroth Electrical Amplifiers

Emerson A6500-RC 16-Channel Output Relay Module

GE Multilin 745-W2-P1-G1-HI-T-H Transformer Protection Relay

Vibro-Meter VM600 MPC4 Mechanical Protection Card

GE IC695PNC001 PROFINET Controller Module

GE IC695PBM300 PACSystems RX3i Communication Module

GE IC695ALG808 Isolated Analog Output Module

Best quality

Shipping

Support 24/7

Classify

Products Categorys

Products Categorys

Contact us

Social Icons

Menu

Search for products