Quickly Connect Rockwell SLC 500 Systems to PROFIBUS Networks and Maximise Network Flexibility with SST™ Communication Modules

The SST™ Communication Module connects Rockwell SLC 500 PLCs as a master or slave to scan or emulate PROFIBUS DP I/O.

With a user-defined data space of 2064 bytes of input and 2064 bytes of output, the SST™ Profibus Module provides the ability to connect SLC CPUs to large PROFIBUS networks.

A 9-pin serial port on the scanner can be used for field firmware upgrades and I/O configuration uploads.

SLC processor logic scanning and PROFIBUS I/O scanning are independent of each other. the SLC processor reads the scanner’s input data during input scanning and writes the output data during output scanning.

The SLC processor reads input data from the scanner during input scanning and writes output data during output scanning. The scanner reads input data from the slaves and writes output data to the slaves independent of the www.ge-drive.com operation of the SLC.

Slave status, diagnostic status information for all slaves, network diagnostic counters and DP master diagnostic counters are maintained by the scanner.

A G-file is required in the SLC.

Features and Benefits

100% backward compatible with previous generation (SST-PFB-SLC)

Manages DP-V1 services, including SLC ladder logic sampling

M0 and M1 data areas doubled up to 1000 words

PROFIBUS DP master configuration software

Supports all PROFIBUS baud rates

Simultaneous operation of PROFIBUS DP masters and slaves

For storing DP

Master I/O configuration

Quick and easy installation on the SLC backplane, PROFIBUS I/O data is automatically mapped to the I/O files of the SLC processor and to the MO and MI files residing on the PB3-SLC.

Supports export of configuration files from SST DP Configuration Software and Siemens COM PROFIBUS

Multiple SST-PB3-SLC modules can be used in one SLC rack